SMC Networks SMC8624/48T manual Displaying Lacp Port Counters, Counter Information

CONFIGURING THE SWITCH

CLI – The following example configures LACP parameters for ports 1-6. Ports 1-4 are used as active members of the LAG; ports 5 and 6 are set to backup mode.

Console(config)#interface ethernet 1/1			3-168
Console(config-if)#lacp actor system-priority 3			3-192
Console(config-if)#lacp actor admin-key 120			3-193
Console(config-if)#lacp actor port-priority 128			3-195
Console(config-if)#exit
.
.
.
Console(config)#interface ethernet 1/6
Console(config-if)#lacp actor system-priority 3
Console(config-if)#lacp actor admin-key 120
Console(config-if)#lacp actor port-priority 512
Console(config-if)#end
Console#sh lacp sysid			3-196
Channel Group	System Priority	System MAC Address

-------------------------------------------------------------------

1	32768	00-00-E9-31-31-31
2	32768	00-00-E9-31-31-31
3	32768	00-00-E9-31-31-31
4	32768	00-00-E9-31-31-31
5	32768	00-00-E9-31-31-31
6	32768	00-00-E9-31-31-31

Console#show lacp	1 internal	3-196
Channel group : 1

-------------------------------------------------------------------

Oper Key : 120

Admin Key : 120 Console#

Displaying LACP Port Counters

You can display statistics for LACP protocol messages.

Counter Information

Table 3-5. LACP Port Counter Information

Field	Description
LACPDUs Sent	Number of valid LACPDUs transmitted from this
	channel group.
LACPDUs Received	Number of valid LACPDUs received on this channel
	group.
Marker Sent	Number of valid Marker PDUs transmitted from this
	channel group.

3-94