Creating VLANs, 149 | SMC Networks SMC8624/48T specification

VLAN CONFIGURATION

CLI – Current VLAN information can be displayed with the following command.

Console#show vlan id 1		3-242
VLAN Type	Name	Status Ports/Channel groups

----------- ----------- ------ ------------------------------------

1 Static DefaultVlan Active Eth1/1 Eth1/2 Eth1/3 Eth1/4 Eth1/5

Eth1/6 Eth1/7 Eth1/8 Eth1/9 Eth1/10

Eth1/11 Eth1/12 Eth1/13 Eth1/14 Eth1/15

Eth1/16 Eth1/17 Eth1/18 Eth1/19 Eth1/20

Eth1/21 Eth1/22 Eth1/23 Eth1/24

Console#

Creating VLANs

Use the VLAN Static List to create or remove VLAN groups. To propagate information about VLAN groups used on this switch to external network devices, you must specify a VLAN ID for each of these groups.

Command Attributes

•Current – Lists all the current VLAN groups created for this system. Up to 255 VLAN groups can be defined. VLAN 1 is the default untagged VLAN.

•New – Allows you to specify the name and numeric identifier for a new VLAN group. (The VLAN name is only used for management on this system; it is not added to the VLAN tag.)

•VLAN ID – ID of configured VLAN (1-4094, no leading zeroes).

•VLAN Name – Name of the VLAN (1 to 32 characters).

•Status (Web) – Enables or disables the specified VLAN.

-Enable: VLAN is operational

-Disable: VLAN is suspended; i.e., does not pass packets.

•State (CLI) – Enables or disables the specified VLAN.

-Active: VLAN is operational.

-Suspend: VLAN is suspended; i.e., does not pass packets.

•Add – Adds a new VLAN group to the current list.

3-149

Page 197

Image 197

SMC Networks SMC8624/48T manual Creating VLANs, 149

Contents

TigerSwitch 10/100/1000 Page TigerSwitch 10/100/1000 Management Guide Trademarks Limited Warranty Limited Warranty Contents Contents Contents Command Line Interface Vii Viii Contents Contents Contents Xii Xiii Xiv Contents Xvi Tables Xvii Xviii Figures 61. Displaying Vlan Information by Port Membership Xix Figures Key Features Key Features Description of Software Features Description of Software Features Introduction Description of Software Features Introduction System Defaults System Defaults System Defaults Dhcp Introduction Configuration Options Connecting to the Switch Required Connections Connecting to the Switch Console Connection Basic ConfigurationRemote Connections Setting Passwords Manual Configuration Setting an IP Address Dynamic Configuration Initial Configuration Community Strings Enabling Snmp Management Access Initial Configuration Trap Receivers Saving Configuration Settings Managing System Files Managing System Files Initial Configuration Using the Web Interface Configuring the Switch Configuring the Switch Home Navigating the Web Browser Interface Panel Display Configuration Options Main Menu Main Menu ACL Lacp STA 141 Vlan ID DNS Field Attributes Displaying System Information CLI Specify the hostname, location and contact information System Information Management Software Displaying Switch Hardware/Software VersionsMain Board Switch Information Web Click System, Switch Information Displaying Bridge Extension Capabilities Web Click System, Bridge Extension Setting the Switch’s IP AddressCLI Enter the following command Command Attributes Manual IP Configuration Dhcp IP Configuration Using DHCP/BOOTP 288 Downloading System Software from a Server Managing Firmware Operation Code Image File Transfer Saving or Restoring Configuration Settings 10. Downloading Configuration Settings from a Server Downloading Configuration Settings from a Server CLI Use the reload command to restart the switch Resetting the System Configuring Sntp Setting the System Clock 13. Sntp Configuration 14. Setting the Time Zone Setting the Time Zone Simple Network Management Protocol Setting Community Access Strings Specifying Trap Managers and Trap Types Access Mode 16. Specifying Trap Managers and Trap Types Configuring the Logon Password User Authentication 17. Configuring the Logon Password Configuring Local/Remote Logon Authentication Command Usage Radius Settings 18. Setting Local, Radius and Tacacs Authentication Tacacs Settings Configuring Https Https Support 19. Https Settings Replacing the Default Secure-site Certificate Configuring the Secure Shell Configuring the Switch Generating the Host Key Pair Field Attributes 20. SSH Host-Key Settings SSH server includes basic settings for authentication Configuring the SSH Server 21. SSH Server Settings Configuring Port Security Command Usage 22. Configuring Port Security Configuring 802.1x Port Authentication 802.1x client Radius server Displaying 802.1x Global Settings 23 .1x Information 111 Configuring 802.1x Global Settings 24 .1x Configuration Configuring Port Authorization Mode Authorized 25 .1x Port Configuration 1x Statistics Displaying 802.1x StatisticsStatistical Values 26 .1x Statistics CLI This example displays the 802.1x statistics for port Access Control ListsConfiguring Access Control Lists Setting the ACL Name and Type CLI This example creates a standard IP ACL named bill 27. Naming and Choosing ACLs 28. Configuring Standard IP ACLs Configuring a Standard IP ACL Command Attributes Configuring an Extended IP ACL Command Attributes Access Control Lists 29. Configuring Extended IP ACLs 120 Configuring a MAC ACL Command Attributes Command Usage 30. Configuring MAC ACLs Specifying the Mask Type Configuring ACL MasksCommand Usage This mask defines the fields to check in the IP header Configuring an IP ACL Mask Configuring the Switch 32. Configuring an IP based ACL This mask defines the fields to check in the packet header Configuring a MAC ACL Mask 33. Configuring a MAC based ACL 148 Binding a Port to an Access Control List 34. Mapping ACLs to Port Ingress/Egress Queues Filtering Management Access 35. Filtering Management Access Field Attributes Web Port ConfigurationDisplaying Connection Status Web Click Port, Port Information or Trunk Information Field Attributes CLI Current status 178 CLI This example shows the connection status for Port Configuring Interface Connections Port Configuration Creating Trunk Groups 37. Configuring Port Attributes Command Usage 38. Static Trunk Configuration Statically Configuring a Trunk Command Usage 189 Enabling Lacp on Selected Ports Command Usage 39. Lacp Port Configuratio 190 Command Attributes 40. Lacp Aggregation Port Configuration Counter Information Displaying Lacp Port CountersYou can display statistics for Lacp protocol messages Lacp Port Counter Information 41. Displaying Lacp Port Counters Information Lacp Settings Displaying Lacp Settings and Status for the Local SideInternal Configuration Information Link Passive 1 Active 42. Displaying Lacp Port Information Lacp Remote Side Settings Displaying Lacp Settings and Status for the Remote SideNeighbor Configuration Information 43. Displaying Remote Lacp Port Information 100 101 Setting Broadcast Storm Thresholds 44. Enabling Port Broadcast Control 102 103 Configuring Port Mirroring 104 Configuring Rate Limits 105 Command Attribute 106 Showing Port Statistics Port Statistics 107 108 Rmon Statistics 109 47. Displaying Port Statistics 110 48. Displaying Etherlike and Rmon Statistics 111 Setting Static Addresses Address Table Settings112 CLI This example shows statistics for port 49. Mapping Ports to Static Addresses 113 114 Displaying the Address Table CLI This example sets the aging time to 400 seconds Changing the Aging Time115 116 Spanning Tree Algorithm Configuration 117 Displaying Global Settings 118 119 52. Displaying the Spanning Tree Algorithm 120 121 Configuring Global SettingsGlobal settings apply to the entire switch 122 Basic Configuration of Global Settings 123 Root Device Configuration 124 Configuration Settings for Rstp 125 53. Configuring the Spanning Tree Algorithm 126 Displaying Interface Settings Rules defining port status are 127 AD B 128 129 CLI This example shows the STA attributes for port Configuring Interface Settings130 131 132 CLI This example sets STA attributes for port Configuring Multiple Spanning Trees133 134 Vlan ID Vlan to assign to this selected MST instance. Range 135 136 137 Displaying Interface Settings for Mstp 138 139 Configuring Interface Settings for Mstp 140 58. Mstp Port Configuration Overview Vlan Configuration141 CLI This example sets the Mstp attributes for port Assigning Ports to VLANs 142 143 144 Forwarding Tagged/Untagged Frames 145 CLI This example enables Gvrp for the switch Enabling or Disabling Gvrp Global SettingDisplaying Basic Vlan Information 146 Displaying Current VLANs Command Attributes Web147 Web Click VLAN, 802.1Q VLAN, Basic Information 148 Command Attributes CLI 149 Creating VLANs CLI This example creates a new Vlan 150 151 Adding Static Members to VLANs Vlan Index 152 63. Configuring Vlan Port Attributes 153 Adding Static Members to VLANs Port Index 154 Configuring Vlan Behavior for Interfaces 155 156 157 65. Configuring Vlan Ports CLI This example enables private VLANs Configuring Private VLANs158 Enabling Private VLANs 159 Configuring Protocol-Based VLANsConfiguring Uplink and Downlink Ports Create a protocol group for one or more protocols Configuring Protocol Groups160 Mapping Protocols to VLANs 161 69. Mapping Protocols to VLANs 162 163 Class of Service ConfigurationSetting the Default Priority for Interfaces 164 CLI This example assigns a default priority of 5 to port 165 Mapping CoS Values to Egress QueuesEgress Queue Priority Mapping 10. CoS Priority Levels 166 71. Configuring Ports and Trunks for Class of Service 167 Selecting the Queue Mode 168 Setting the Service Weight for Traffic Classes 169 Mapping Layer 3/4 Priorities to CoS Values 170 Selecting IP Precedence/DSCP Priority 11. IP Precedence Prioruty Mapping IP Precedence171 172 75. Mapping IP Precedence to Class of Service Values 173 Mapping Dscp Priority 174 76. Mapping IP Dscp Priority to Class of Service Values 175 Mapping IP Port Priority 78. IP Port Priority Mapping 176 13. CoS to ACL Mapping Mapping CoS Values to ACLs177 178 Changing Priorities Based on ACL Rules 179 79. Changing Priorities Based on ACL Rules 180 181 Multicast Filtering 182 Configuring Igmp Snooping and Query ParametersLayer 2 Igmp Snooping and Query 183 184 80. Configuring Internet Group Management Protocol Displaying Interfaces Attached to a Multicast Router Command Attributes185 Specifying Static Interfaces for a Multicast Router 186 187 Displaying Port Members of Multicast Services 188 Assigning Ports to Multicast Services 84. Specifying Multicast Port Membership 189 190 Configuring Domain Name ServiceConfiguring General DNS Server Parameters 191 192 85. Configuring DNS 193 Configuring Static DNS Host to Address Entries 86. Mapping IP Addresses to a Host Name 194 195 Displaying the DNS Cache Web Select DNS, Cache 196 Accessing the CLI Using the Command Line Interface Telnet Connection Using the Command Line Interface This section describes how to enter CLI commands Entering CommandsKeywords and Arguments Minimum Abbreviation Getting Help on Commands Command Completion Showing Commands Partial Keyword Lookup Negating the Effect of CommandsUsing Command History Command Modes Understanding Command ModesExec Commands Configuration Commands Mode Command Prompt Configuration Commands Keystroke Function Command Line Processing Command Group Index Command Groups 255 Line Command Syntax Line Commands Command Mode Default SettingLine Syntax Line console vty Syntax Login local no login LoginRelated Commands Username 4-35 password PasswordSyntax Password 0 7 password no password No password is specified Login 4-16password-thresh4-19 Exec-timeoutSyntax Exec-timeout seconds no exec-timeout CLI No timeout Telnet 10 minutes To set the timeout to two minutes, enter this command Password-threshSyntax Password-thresh threshold no password-thresh Default value is three attempts Syntax Silent-time seconds no silent-time Silent-time Databits To specify 7 data bits, enter this commandSyntax Databits 7 8 no databits Seven data bits per character Eight data bits per character Parity To specify no parity, enter this commandSyntax Parity none even odd no parity None No parity Even Even parity Odd Odd parity Speed To specify 57600 bps, enter this commandSyntax Speed bps no speed Auto Disconnect StopbitsSyntax Stopbits 1 Syntax Disconnect session-id Syntax Show line console vty Show line Enable General CommandsGeneral Commands Syntax Enable level Disable Enable password DisableNormal Exec None Show history Configure Reload This command restarts the system This example shows how to reset the switch This command resets the entire systemThis command returns to Privileged Exec mode End Exit This command exits the configuration programQuit Any System Mangement Commands System Management CommandsThis example shows how to quit a CLI session Device Designation Commands Device Designation CommandsPrompt Syntax Prompt string no prompt User Access Commands User Access CommandsHostname Syntax Hostname name no hostname Username Default is level Default password is super Enable password 10. IP Filter Commands IP Filter Commands All addresses Management Show management 11. Web Server Command Web Server Commands Syntax No ip http server Default Setting Default Setting Command ModeIp http port Ip http server Ip http port Copy tftp https-certificate Syntax No ip http secure-server Default SettingIp http secure-server Ip http secure-port4-44 Copy tftp https-certificate Portnumber The UDP port used for HTTPS/SSL. Range Ip http secure-port443 Ip http secure-server4-42 12. Secure Shell Commands Secure Shell Commands 12. Secure Shell Commands System Management Commands Ip ssh server Syntax Ip ssh server no ip ssh server Default SettingDisabled Syntax Ip ssh timeout seconds no ip ssh timeout Ip ssh timeoutIp ssh crypto host-key generate 4-52 show ssh Seconds Show ip ssh Ip ssh authentication-retriesExec-timeout4-18 show ip ssh Syntax Delete public-key username dsa rsa Ip ssh server-key sizeDelete public-key Syntax Ip ssh crypto host-key generate dsa rsa Ip ssh crypto host-key generateDsa DSA key type Rsa RSA key type Generates both the DSA and RSA key pairs Ip ssh crypto zeroize Use this command to clear the host key from memory i.e. RAMIp ssh crypto zeroize 4-53 ip ssh save host-key4-54 Syntax Ip ssh crypto zeroize dsa rsa Syntax Ip ssh save host-key dsa rsa Ip ssh save host-keyShow ip ssh 13. SSH Information Show ssh Username Name of an SSH user. Range 1-8 characters Show public-keySyntax Show public-key user username host RSA Shows all public keys 14. Event Logging Commands Event Logging CommandsSyntax No logging on Default Setting Logging on Logging history 4-59 clear logging Logging history Logging host Flash errors level 3 RAM warnings level 7Syntax No logging host hostipaddress Hostipaddress The IP address of a syslog server Syntax No logging facility type Logging facility Clear logging Logging trapSyntax Logging trap level no logging trap Syntax Clear logging flash ram Syntax Show logging flash ram sendmail trap Show loggingShow logging Following example displays settings for the trap function Show logging sendmail Smtp Alert Commands15. Smtp Alert Commands Syntax No logging sendmail host ipaddress Logging sendmail host Logging sendmail source-email Logging sendmail levelSyntax Logging sendmail level level Syntax Logging sendmail source-email email-address Syntax No logging sendmail destination-email email-address Logging sendmail destination-email Show logging sendmail Syntax No logging sendmail Default SettingLogging sendmail 16. Time Commands Time Commands Sntp poll 4-72 show sntp Sntp serverSyntax Sntp server ip1 ip2 ip3 Sntp poll Related CommandsSntp client Syntax Sntp poll seconds no sntp poll Disabled Show sntp Syntax No sntp broadcast client Default SettingSntp broadcast client Show sntp Clock timezone Calendar set This command displays the system clockShow calendar Syntax 17. System Status Commands System Status CommandsShow startup-config Command Usage Show running-config4-80 Show running-config Show startup-config4-77 Show system This command displays system information Show version Show users 18. Frame Size Commands Frame Size CommandsSyntax No jumbo frame Default Setting Jumbo frame 19. Flash/File Commands Flash/File Commands Copy Command Usage Following example shows how to download a configuration file Delete This command deletes a file or imageFilename Name of the configuration file or image name Syntax Dir boot-rom config opcode filename This command displays a list of files in flash memoryDir Dir Delete public-key4-51 Following example shows how to display all file information Whichboot Syntax Boot system boot-romconfig opcode filename Boot system Authentication Sequence Authentication CommandsDir 4-90 whichboot 20. Authentication Commands Local Authentication login 22. Radius Client Commands Username for setting the local user names and passwordsRadius Client Radius-server host 10.1.0.1 Radius-server portSyntax Radius-server port portnumber no radius-server port 1812 Syntax Radius-server key keystring no radius-server key Radius-server keyRadius-server retransmit Show radius-server Radius-server timeout TACACS+ Client 23. TACACS+ Client CommandsTacacs-server host Hostipaddress IP address of a TACACS+ server Syntax Tacacs-server port portnumber no tacacs-server port Tacacs-server port Syntax Tacacs-server key keystring no tacacs-server key Tacacs-server keyShow tacacs-server Port security Port Security Commands24. Port Security Commands Interface Configuration Ethernet Status Disabled Action None Maximum Addresses 25 .1x Port Authentication Commands 802.1x Port Authentication Authentication dot1x default Syntax Dot1x default Command Mode Dot1x defaultDefault Command Mode Dot1x max-req Interface Configuration DefaultDot1x port-control Force-authorized Syntax Dot1x re-authenticate interface Dot1x re-authenticateDot1x operation-mode Ethernet unit/port Dot1x timeout quiet-period Dot1x re-authenticationSyntax No dot1x re-authentication Command Mode Seconds The number of seconds. Range Dot1x timeout tx-period Dot1x timeout re-authperiod Show dot1x statistics interface interface Show dot1x State- Current state including initialize, reauthenticate Authenticator State Machine 113 Access Control Lists Access Control List Commands Access Control List Commands 26. Access Control List Commands Masks for Access Control Lists27. IP ACL Commands IP ACLs EXT-ACL Syntax No access-list ip standard extended aclname Access-list ip Standard ACL Permit, deny Ip access-group4-129 show ip access-list4-123 No permit deny tcp Access-list ip Extended ACL 122 Access-list ip mask-precedence Show ip access-listSyntax Show ip access-list standard extended aclname Syntax No access-list ip mask-precedence in out Mask IP ACL 4-125 ip access-group4-129 IP Mask Syntax No mask protocol 126 127 Syntax Show access-list ip mask-precedence in out Show access-list ip mask-precedence Mask IP ACL Ip access-groupSyntax No ip access-group aclname in out Map access-list ip Show ip access-groupShow ip access-list4-123 This command shows the ports assigned to IP ACLs Queue cos-map4-260 Show map access-list ip Map access-list ip Show map access-list ipSyntax Show map access-list ip interface Match access-list ip Show marking Match access-list ipShow marking MAC ACLs 28. MAC ACL Commands Syntax No access-list mac aclname Access-list mac Any host destination destination address-bitmask Permit, deny MAC ACL MAC ACL Access-list mac mask-precedence Show mac access-listThis command displays the rules for configured MAC ACLs Syntax Show mac access-list aclname Mask MAC ACL Mask MAC ACL 4-140 mac access-group4-144 MAC Mask 142 This example creates an Egress MAC ACL Show access-list mac mask-precedenceSyntax Show access-list mac mask-precedence in out Show mac access-list4-139 Mac access-groupSyntax Mac access-group aclname in out Map access-list mac Show mac access-groupThis command shows the ports assigned to MAC ACLs Syntax No map access-list mac aclname cos cos-value Syntax Show map access-list mac interface Show map access-list macQueue cos-map4-260 Show map access-list mac Match access-list mac 29. ACL Information Show access-listACL Information Show access-group Snmp CommandsThis command shows the port assignments of ACLs 30. Snmp Commands Syntax Snmp community string rorw no snmp community string Snmp community Snmp location Snmp contactSyntax Snmp contact string no snmp contact Syntax Snmp-server location text no snmp-server location Host Address None Snmp Version Snmp host Consoleconfig#snmp-server host 10.1.19.23 batman Issue authentication and link-up-down traps Snmp enable trapsSyntax No snmp enable traps authentication link-up-down Show snmp This command checks the status of Snmp communications 156 31. DNS Commands DNS Commands This example maps two address to a host name Ip hostNo static entries Ip domain-name Clear hostSyntax Clear host name Syntax Ip domain-name name no ip domain-name Syntax No ip domain-list name Ip domain-list Ip domain-name4-159 Server-address1- IP address of domain-name server Ip name-server Ip domain-name4-159 ip domain-lookup4-163 Syntax No ip domain-lookup Default SettingIp domain-lookup Ip domain-name4-159 ip name-server4-162 Show hosts This command displays entries in the DNS cache This command displays the configuration of the DNS serverShow dns Show dns cache Clear dns cache This command clears all entries in the DNS cache 167 32. Interface Commands Interface Commands Description InterfacePort-channel channel-idRange Syntax Description string no description Following example adds a description to port Interface Configuration Ethernet, Port ChannelSpeed-duplex Negotiation 4 -170 capabilities 4 Syntax No negotiation Default SettingNegotiation Capabilities 4 -172speed-duplex 4 Following example configures port 11 to use autonegotiation Capabilities Flow control enabled Syntax No flowcontrol Default SettingFlowcontrol Negotiation 4 -170speed-duplex 4 -169 flowcontrol 4 Syntax Combo-forced-mode mode no combo-forced-mode Following example enables flow control on portCombo-forced-mode Negotiation 4 Capabilities flowcontrol, symmetric All interfaces are enabled Syntax No shutdown Default SettingFollowing example disables port Shutdown Switchport broadcast packet-rate Port-channel channel-idRange Default Setting This command clears statistics on an interfaceClear counters Following example clears statistics on port Show interfaces status This command displays the status for an interfaceSyntax Show interfaces status interface Shows the status for all interfaces Show interfaces counters This command displays interface statisticsSyntax Show interfaces counters interface Shows the counters for all interfaces 180 Syntax Show interfaces switchport interface Show interfaces switchportThis example shows the configuration setting for port Shows all interfaces Shows if acceptable Vlan frames include all types or 33. Mirror Port Commands Mirror Port CommandsInterface Configuration Ethernet, destination port Port monitor Unit Switch unit Port Port number This command displays mirror informationShow port monitor Syntax Show port monitor interface 34. Rate Limit Commands Rate Limit CommandsFollowing shows mirroring configured from port 6 to port Mbps Rate-limit 35. Link Aggregation Commands Link Aggregation Commands General Guidelines Guidelines for Creating Trunks Syntax Channel-group channel-idno channel-group Channel-groupChannel-id- Trunk index Range Current port will be added to this trunk Lacp Syntax No lacp Default Setting 191 32768 Lacp system-priority Lacp admin-keyEthernet Interface Interface Configuration Port Channel Lacp admin-key Port ChannelSyntax Lacp admin-key key no lacp admin-key Lacp port-priority Port Channel all This command displays Lacp informationShow lacp 197 198 199 200 Address Table Commands36. Adress Table Commands 201 Mac-address-table staticMac-address- MAC address Vlan-id- Vlan ID Range Show mac-address-table Clear mac-address-table dynamic202 Mac-address- MAC address Mask Bits to match in the address 203 Mac-address-table aging-time 204 Show mac-address-table aging-time 205 Spanning Tree Commands37. Spanning Tree Commands Spanning-tree Spanning tree is enabled206 No spanning-tree Rstp Spanning-tree mode207 208 209 Spanning-tree forward-time 210 Spanning-tree hello-timeSpanning-tree max-age 211 Spanning-tree priority Long method Spanning-tree pathcost method212 This command limits the maximum transmission rate for BPDUs Spanning-tree mst-configurationSpanning-tree transmission-limit 213 214 MST ConfigurationMst vlan 215 Mst priority Name Switch’s MAC address216 Syntax Name name 217 RevisionRevision 4 Syntax Revision number Name 4 Max-hops218 Syntax No spanning-tree spanning-disabled Default Setting Spanning-tree spanning-disabledSpanning-tree cost 219 220 Spanning-tree port-priorityPriority The priority for a port. Range 0-240, in steps 128 Spanning-tree edge-port Syntax No spanning-tree edge-port Default Setting221 Spanning-tree cost 4 Spanning-tree portfast Syntax No spanning-tree portfast Default Setting222 Spanning-tree portfast 4 Spanning-treeedge-port 4 Spanning-tree link-type223 224 Spanning-tree mst cost Spanning-tree mst port-priority 4 225 Spanning-tree mst cost 4 Spanning-tree mst port-priority226 Spanning-tree protocol-migration Port-channel channel-idRange Command Mode227 Syntax Spanning-tree protocol-migration interface Syntax Show spanning-tree interface mst instanceid Show spanning-tree228 229 This command shows the multiple spanning tree configuration Show spanning-tree mst configurationSyntax Show spanning-tree mst configuration Command Mode 230 38. Vlan Commands Vlan CommandsEditing Vlan Groups 231 Show vlan 4 232Vlan database Vlan Database Configuration By default only Vlan 1 exists and is active233 Vlan 234 Configuring Vlan Interfaces40. Configuring Vlan Interfaces Interface vlan 235Syntax Interface vlan vlan-id Shutdown 4 Syntax Switchport mode trunk hybrid no switchport mode Switchport modeAll ports are in hybrid mode with the Pvid set to Vlan Switchport acceptable-frame-types 4 Switchport mode 4 Switchport acceptable-frame-types237 All frame types 238 Switchport ingress-filteringSyntax No switchport ingress-filtering Default Setting 239 Switchport native vlan 240 Switchport allowed vlan No VLANs are included in the forbidden list Switchport forbidden vlan241 242 Displaying Vlan InformationShow vlan 41. Displaying Vlan Information 243 Following example shows how to display information for Vlan42. Protocol-based Vlan Commands 244 Protocol-vlan protocol-group Configuring GroupsNo protocol groups are configured No protocol groups are mapped for any interface Protocol-vlan protocol-group Configuring Interfaces245 Show protocol-vlan protocol-group 246Syntax Show protocol-vlan protocol-group group-id Group-id- Group identifier for a protocol group. Range 247 This shows protocol group 1 configured for IP over EthernetShow interfaces protocol-vlan protocol-group Mapping for all interfaces is displayed 248 43. Private Vlan CommandsPvlan No private VLANs are defined Show pvlan This command displays the configured private Vlan249 44. Gvrp and Bridge Extension Commands Gvrp and Bridge Extension CommandsSyntax No bridge-ext gvrp Default Setting 250 Show bridge-ext 251 Show gvrp configuration Switchport gvrpSyntax No switchport gvrp Default Setting Syntax Show gvrp configuration interface 253 Garp timer Show garp timer 4 Show garp timerSyntax Show garp timer interface Shows all Garp timers Garp timer 4 Priority Commands45. Priority Commands 255 Switchport priority default Priority Commands Layer46. Priority Commands Layer 256 257 Syntax Queue mode strict wrr no queue mode Queue modeWeighted Round Robin 258 Show queue bandwidth 4 259Queue bandwidth Queue cos-map 260 This command shows the current queue mode Show queue mode261 Show queue cos-map 4 262 This command shows the class of service priority mapShow queue bandwidth Show queue cos-map 263 Priority Commands Layer 347. Priority Commands Layer 3 264 Syntax Map ip port no map ip port Default Setting 265 Syntax No map ip precedence Default Setting 266 List below shows the default priority mapping 267 Syntax No map ip dscp Default Setting 268 Map ip dscp Interface Configuration 269 Use this command to show the IP port priority mapShow map ip port Syntax Show map ip port interface 270 This command shows the IP precedence priority mapShow map ip precedence Syntax Show map ip precedence interface 271 This command shows the IP Dscp priority mapShow map ip dscp Syntax Show map ip dscp interface Igmp Snooping Commands Multicast Filtering Commands48. Multicast Filtering Commands 49. Igmp Snooping Commands 273 Following example enables Igmp snoopingIp igmp snooping No ip igmp snooping Ip igmp snooping vlan static 274 275 Following configures the switch to use Igmp VersionIp igmp snooping version Igmp Version Show mac-address-table multicast 276Show ip igmp snooping 277 Igmp Query Commands Layer50. Igmp Query Commands Layer 278 Syntax No ip igmp snooping querier Default SettingIp igmp snooping querier Ip igmp snooping query-count 279 Following shows how to configure the query count toIp igmp snooping query-interval Ip igmp snooping query-max-response-time 4 Ip igmp snooping query-max-response-time Seconds The report delay advertised in Igmp queries. Range280 Ip igmp snooping router-port-expire-time Switch must use IGMPv2 for this command to take effect281 51. Static Multicast Routing Commands Static Multicast Routing Commands282 Ip igmp snooping vlan mrouter 283 Displays multicast router ports for all configured VLANsShow ip igmp snooping mrouter Syntax Show ip igmp snooping mrouter vlan vlan-id Basic IP Configuration IP Interface Commands52. Basic IP Configuration commands 284 285 Interface Configuration VlanIp address IP address Netmask 286 This command submits a Bootp or Dhcp client requestIp dhcp restart Ip dhcp restart 4 287 Ip default-gatewaySyntax Ip default-gateway gateway no ip default-gateway Show ip redirects 288Show ip interface 289 This command has no default for the hostPing Syntax Ping host count countsize size Interface 4 290 291 Authentication Software FeaturesDhcp Client Port Configuration Flow Control Additional Features Class of ServicePort Mirroring Rate Limits Standards Management FeaturesIn-Band Management Out-of-Band Management Management Information Bases Table B-1. Troubleshooting Chart Appendix B Troubleshooting Troubleshooting Glossary-1 Glossary-2 Glossary-3 Glossary-4 Glossary-5 Glossary-6 Glossary-7 User Datagram Protocol UDP Glossary-8Virtual LAN Vlan XModem Index-1 Numerics Igmp Index-2 Snmp Snmp Index-3 Index-4 Page For Technical SUPPORT, Call

3-242

Creating VLANs

Command Attributes

3-149