SMC Networks SMC8624/48T manual 248, Pvlan, Private Vlan Commands, No private VLANs are defined

VLAN COMMANDS

Configuring Private VLANs

Private VLANs provide port-based security and isolation between ports within the assigned VLAN. This section describes commands used to configure private VlANs.

Table 4-43. Private VLAN Commands

Command	Function	Mode	Page
pvlan	Enables and configured private	GC	4-248
	VLANS
show pvlan	Displays the configured private	PE	4-249
	VLANS

pvlan

This command enables or configures a private VLAN. Use the no form to disable the private VLAN.

Syntax

pvlan [up-linkinterface-list down-linkinterface-list]no pvlan

•up-link– Specifies an uplink interface.

•down-link– Specifies a downlink interface.

Default Setting

No private VLANs are defined.

Command Mode

Global Configuration

Command Usage

•A private VLAN provides port-based security and isolation between ports within the VLAN. Data traffic on the downlink ports can only be forwarded to, and from, the uplink port.

•Private VLANs and normal VLANs can exist simultaneously within the same switch.

4-248