SMC Networks SMC8624/48T manual 267, Syntax No map ip dscp Default Setting

COMMAND LINE INTERFACE

Example

The following example shows how to map IP precedence value 1 to CoS value 0:

Console(config)#interface ethernet 1/5

Console(config-if)#map ip precedence 1 cos 0

Console(config-if)#

map ip dscp (Global Configuration)

This command enables IP DSCP mapping (i.e., Differentiated Services Code Point mapping). Use the no form to disable IP DSCP mapping.

Syntax

[no] map ip dscp

Default Setting

Disabled

Command Mode

Global Configuration

Command Usage

•The precedence for priority mapping is IP Port, IP Precedence or IP DSCP, and default switchport priority.

•IP Precedence and IP DSCP cannot both be enabled. Enabling one of these priority types will automatically disable the other type.

Example

The following example shows how to enable IP DSCP mapping globally.

Console(config)#map ip dscp

Console(config)#

4-267