SMC Networks SMC8624/48T 269, Show map ip port, Use this command to show the IP port priority map

COMMAND LINE INTERFACE

Example

The following example shows how to map IP DSCP value 1 to CoS value 0.

Console(config)#interface ethernet 1/5

Console(config-if)#map ip dscp 1 cos 0

Console(config-if)#

show map ip port

Use this command to show the IP port priority map.

Syntax

show map ip port [interface]

interface

•ethernet unit/port

-unit - This is device 1.

-port - Port number.

•port-channel channel-id(Range: 1-6)

Default Setting

None

Command Mode

Privileged Exec

Example

The following shows that HTTP traffic has been mapped to CoS value 0:

Console#show map		ip	port
TCP port	mapping	status: disabled
Port	Port no. COS
--------- --------			---
Eth 1/	5	80	0
Console#

4-269