SMC Networks SMC8624/48T manual 180, Changing Priorities Based on ACL Rules

CONFIGURING THE SWITCH

Web – Click Priority, ACL Marker. Select a port and an ACL rule. To specify a ToS priority, mark the Precedence/DSCP check box, select Precedence or DSCP from the scroll-down box, and enter a priority. To specify an 802.1p priority, mark the 802.1p Priority check box, and enter a priority. Then click Add.

Figure 3-79. Changing Priorities Based on ACL Rules

CLI – This example changes the DSCP priority for packets matching an IP ACL rule, and the 802.1p priority for packets matching a MAC ACL rule.

Console(config)#interface ethernet 1/1			3-168
Console(config-if)#match		access-list ip bill set dscp 0	3-133
Console(config-if)#match		access-list mac mike set priority 0	3-147
Console(config-if)#end
Console#show marking			3-134
Interface ethernet	1/1
match access-list	IP bill set DSCP 0
match access-list	MAC a	set priority 0

3-180