SMC Networks SMC8624/48T manual Configuring Port Authorization Mode, 24 .1x Configuration

CONFIGURING THE SWITCH

Web – Select Security, 802.1x, Configuration. Enable dot1x globally for the switch, modify any of the parameters required, and then click Apply.

Figure 3-24. 802.1x Configuration

CLI – This enables re-authentication and sets all of the global parameters for 802.1x.

Console(config)#dot1x re-authentication	3-109
Console(config)#dot1x max-req 5	3-106
Console(config)#dot1x timeout quiet-period 40	3-109
Console(config)#dot1x timeout re-auth 5	3-110
Console(config)#dot1x timeout tx-period 40	3-110
Console(config)#authentication dot1x default radius	3-106
Console(config)#

Configuring Port Authorization Mode

When dot1x is enabled, you need to specify the dot1x authentication mode configured for each port.

Command Attributes

•Status – Indicates if authentication is enabled or disabled on the port.

•Operation Mode – Allows single or multiple hosts (clients) to connect to an 802.1X-authorized port. (Range: Single-Host, Multi-Host; Default: Single-Host)

3-56