SMC Networks SMC8624/48T Event Logging Commands, Logging on, Syntax No logging on Default Setting

COMMAND LINE INTERFACE

Event Logging Commands

Table 4-14. Event Logging Commands

Command	Function	Mode	Page
logging on	Controls logging of error messages	GC	4-58
logging history	Limits syslog messages saved to switch	GC	4-59
	memory based on severity
logging host	Adds a syslog server host IP address that will	GC	4-60
	receive logging messages
logging facility	Sets the facility type for remote logging of	GC	4-61
	syslog messages
logging trap	Limits syslog messages saved to a remote	GC	4-62
	server based on severity
clear logging	Clears messages from the logging buffer	PE	4-62
show logging	Displays the state of logging	PE	4-63

logging on

This command controls logging of error messages, sending debug or error messages to switch memory. The no form disables the logging process.

Syntax

[no] logging on

Default Setting

None

Command Mode

Global Configuration

Command Usage

The logging process controls error messages saved to switch memory. You can use the logging history command to control the type of error messages that are stored.

4-58