SMC Networks SMC8624/48T manual Priority Commands Layer, 256, Switchport priority default

PRIORITY COMMANDS

Priority Commands (Layer 2)

Table 4-46. Priority Commands (Layer 2)

Command	Function	Mode	Page
switchport priority	Sets a port priority for incoming untagged	IC	4-256
default	frames
queue mode	Sets the queue mode to strict priority or	GC	4-258
	Weighted Round-Robin (WRR)
queue bandwidth	Assigns round-robin weights to the	GC	4-259
	priority queues
queue cos map	Assigns class-of-service values to the	IC	4-260
	priority queues
show queue mode	Shows the current queue mode	PE	4-261
show queue	Shows round-robin weights assigned to	PE	4-262
bandwidth	the priority queues
show queue cos-map	Shows the class-of-service map	PE	4-262
show interfaces	Displays the administrative and	PE	4-181
switchport	operational status of an interface

switchport priority default

This command sets a priority for incoming untagged frames. Use the no form to restore the default value.

Syntax

switchport priority default default-priority-idno switchport priority default

default-priority-id- The priority number for untagged ingress traffic. The priority is a number from 0 to 7. Seven is the highest priority.

Default Setting

The priority is not set, and the default value for untagged frames received on the interface is zero.

4-256