Cisco Systems SFS 7000D Power supply DC fail error, Power supply fan fail error, OL-10853-01

Chapter 6 Hardware Diagnostic Tests

Displaying Hardware Errors

You can also view POST error codes with the show diagnostic post command. This command displays the results of each POST that executes at power-up.

SFS-7000P#show diagnostic post

======================================================================
		Post Status
======================================================================
fru-slot	post-status	error-codes
--------------------------------------------------------------------------------
card(1)	failed	1:0:0:0
fan(1)	passed	0:0:0:0
fan(2)	passed	0:0:0:0
power-supply(1)	passed	0:0:0:0

Step 2 Display FRU errors on your switch by entering the show diagnostic fru-errorcommand. SFS-7000P#show diagnostic fru-error

======================================================================

Fru-Error

======================================================================

fru-slot fru-error

--------------------------------------------------------------------------------

card(1) _FRU_POWER_CONTROLLER_CONFIG_ERR

fan(1)none

fan(2)none power-supply(1) none

Table 6-1lists the hardware errors that are logged for the power supply.

Table 6-1	Cisco SFS 7000P and SFS 7000D Server Switches Power Supply Errors
Error Number		Description
1		Power supply DC fail error
2		Power supply fan fail error
3		Power supply I2C communication error

Cisco SFS 7000P and SFS 7000D InfiniBand Server Switches Hardware Installation Guide

OL-10853-01 6-9