Cisco Systems SFS 7000D, SFS 7000P System Features, LEDs, Power Supply Bay, Power Supply Module

Chapter 1 Product Overview

System Features

LEDs

The Cisco SFS 7000P and SFS 7000D Server Switches feature the following LEDs:

•Chassis LEDs—Show overall system status, power status, and fan status. LEDs and their use are described in the “Chassis Status LEDs” section on page 5-1.

•InfiniBand Port LEDs—Show link status, diagnostics, and network traffic. LEDs and their uses are described in the “InfiniBand Port LEDs” section on page 5-3.

Power Supply Bay

The chassis provides dual independent IEC connectors that are left- and right-justified.

Power Supply Module

The power supply module, which contains the power supply and fan unit, has the following features:

•Redundant and hot-swappable— The replacement of any one power supply module does not disrupt the operation of the device and can be successfully completed without removing the device from a rack or disconnecting any cables.

•Auto-ranging 90 to 264 VAC, 47 to 63 Hz.

•Redundant, hot-swappable cooling.

See the “Installing a Power Supply Module” section on page 4-2for more information.

System Features

This section describes the system features of the Cisco SFS 7000P and SFS 7000D Server Switches and includes the following topics:

•InfiniBand Connectivity, page 1-3

•Scalability, page 1-4

•High Availability, page 1-4

•Nonblocking Architecture, page 1-5

InfiniBand Connectivity

The Cisco SFS 7000P and SFS 7000D Server Switches can be used in a variety of networking environments, including database tiers, application tiers, and World Wide Web tiers.

The Cisco SFS 7000P Server Switch provides 10 Gbps connectivity to servers, while the

Cisco SFS 7000D Server Switch provides 20 Gbps DDR or 10 Gbps SDR modes for connectivity to servers.

Note Copper passive DDR cables are limited to 8 meters in length. If you want to use a longer SDR cable in place of a DDR cable, the port must be comfigured manually to run an SDR rate.

Cisco SFS 7000P and SFS 7000D InfiniBand Server Switches Hardware Installation Guide

OL-10853-01 1-3