Cisco Systems SFS 7000P, SFS 7000D manual Displaying Hardware Errors, enable, more sysloghwiflog

Chapter 6 Hardware Diagnostic Tests

Displaying Hardware Errors

================================================================

Fru-Error

================================================================

fru-slot fru-error

----------------------------------------------------------------

card(9)	none
card(10)	none
card(11)	none
card(12)	none
card(13)	none
card(14)	none
card(15)	none
card(17)	none
fan(1)	none
fan(2)	none
fan(3)	none
fan(4)	none

power-supply(1) none power-supply(2) none SFS-7000P#

Step 6 Reboot the chassis when the self-test is complete.

SFS-7000P# reload

System configuration is modified. Save? [yes(default) no filename] y

Proceed with reload? [yes(default) no] y

Displaying Hardware Errors

Note The sample text in the steps below shows command output for the Cisco SFS 7000P Server Switch. For the Cisco SFS 7000D Server Switch, you would see a similar display.

To display POST results, non-fatal errors that can are recovered, informational logging (such as firmware updates), and hardware errors follow these steps:

	Step 1	Enter the more syslog:hwif_log command to see the contents of the hardware log file.
		SFS-7000P>		enable
		SFS-7000P#		more syslog:hwif_log
		Thu Mar	4	10:57:49 2004: POST: SEEPROM: PASSED
		Thu Mar	4	10:57:49 2004: POST: FPGA: PASSED
		Thu Mar	4	10:57:49 2004: POST: SUMMIT: PASSED
		Thu Mar	4	10:57:50 2004: POST: RTC: PASSED
		Thu Mar	4	10:57:54 2004: POST: FAN: PASSED
		Thu Mar	4	10:57:54 2004: card_startup.x : card is starting up
		Thu Mar	4	10:57:54 2004: Anafa2Init: a2update set to IGNORE
		Thu Mar	4	10:58:16 2004: Anafa2 POST: firmware check PASSED
		Thu Mar	4	19:01:55 2004: POST: SEEPROM: PASSED
		Thu Mar	4	19:01:55 2004: POST: FPGA: PASSED
		Thu Mar	4	19:01:55 2004: POST: SUMMIT: PASSED
		Thu Mar	4	19:01:56 2004: POST: RTC: PASSED
		Thu Mar	4	19:02:00 2004: POST: FAN: PASSED
		Thu Mar	4	19:02:00 2004: card_startup.x : card is starting up
		Thu Mar	4	19:02:00 2004: Anafa2Init: a2update set to IGNORE
		<output truncated>
	Cisco SFS 7000P and SFS 7000D InfiniBand Server Switches Hardware Installation Guide
6-8				OL-10853-01