Cisco Systems SFS 7000D Enter the show diagnostic fan command, Enter the diag fan id command

Chapter 6 Hardware Diagnostic Tests

About Diagnostic Tests

Figure 6-1 Power Supply Numbers on the Cisco SFS 7000P and SFS 7000D Server Switches

181046

Power Supply 1

Power Supply 2

Enter the show diagnostic fan command.

SFS-7000P#show diagnostic fan

======================================================================

Diagnostic Tests For Fan

======================================================================

module-type : fan module-number : 2

test : self-test iterations : 1

action : start

result : success

percentage-completed : 100

result-string : Fan Self Test Completed, Final report : Passed=1, Failed=0,

Total=1

Step 2 Enter the diag fan id command.

SFS-7000P# config SFS-7000P(config)# diag fan 1

SFS-7000P(config-diag-fan-1)# test self-test SFS-7000P(config-diag-fan-1)# start SFS-7000P(config-diag-fan-1)# exit SFS-7000P(config)# exit

SFS-7000P# show diag fan

======================================================================

Diagnostic Tests For Fan

======================================================================

module-type : fan module-number : 1

test : self-test iterations : 1

action : start

result : in-progress

percentage-completed : 70

result-string : Self Test, Current report : In progress...

SFS-7000P#

Step 3 Display the progress of the test by entering the show diag fan command.

SFS-7000P(config-diag-fan-1)# exit

SFS-7000P(config)# exit

Cisco SFS 7000P and SFS 7000D InfiniBand Server Switches Hardware Installation Guide

OL-10853-01 6-5