Cisco Systems SFS 7000P, SFS 7000D manual Running Power Supply Tests, diag, fru-error

Chapter 6 Hardware Diagnostic Tests

Running Power Supply Tests

	SFS-7000P# show	diag	fan
	================================================================================
	Diagnostic Tests For		Fan
	================================================================================
	module-type : fan
	module-number :	1
	test : self-test
	iterations : 1
	action : start
	result : success
	percentage-completed		: 100
	result-string : Fan Self Test Completed, Final report : Passed=1, Failed=0, Total=1
	SFS-7000P#
Step 4	Display any errors that appear in the result string by entering the show diag fru-errorcommand.
	SFS-7000P# show	diag	fru-error
	============================================================
			Fru-Error
	============================================================
	fru-slot	fru-error
	------------------------------------------------------------
	card(1)	none
	card(2)	none
	card(7)	none
	card(8)	none
	card(9)	none
	card(10)	none
	card(11)	none
	card(12)	none
	card(13)	none
	card(14)	none
	card(15)	none
	card(17)	none
	fan(1)	none
	fan(2)	none
Step 5	Reboot the chassis when the self-test is complete.
	SFS-7000P# reload
	System configuration		is modified. Save? [yes(default) no filename] y
	Proceed with reload?		[yes(default) no] y

Running Power Supply Tests

The following tests are available to locate and diagnose fan modules:

•LED Test

•Self-Test

Note The sample text in this section shows command output for the Cisco SFS 7000P Server Switch. For the Cisco SFS 7000D Server Switch, you would see a similar display.

Cisco SFS 7000P and SFS 7000D InfiniBand Server Switches Hardware Installation Guide

6-6 OL-10853-01