Cisco Systems SFS 7000P, SFS 7000D manual Installing the Switch with Two People

Chapter 3 Installing the Switches

Rack-Mounting the Switches

Step 7 Carefully push the switch unit into the rack, as shown in Figure 3-5.

If the brackets do not slide easily, the alignment might be off. Pull the switch back toward you, and realign the brackets.

Figure 3-5 Sliding the Switch Into the Rack

		144954
Step 8	Maintain at least six inches between the cooling vents and any obstructions.
Step 9	Secure the switch with your screws through the front of the rack, as shown in Figure 3-6.
	Figure 3-6	Secure Switch with Screws through the Front of the Rack

144955

Installing the Switch with Two People

The following installation method requires two people to mount the switch into the rack. One person holds the switch while another person secures it to the rack.

To install the switch with two people, follow these steps:

Step 1 Separate the assembled rack brackets. (See Figure 3-1.)

Cisco SFS 7000P and SFS 7000D InfiniBand Server Switches Hardware Installation Guide

3-6 OL-10853-01