Cisco Systems SFS 7000D, SFS 7000P manual 3-13, 13 InfiniBand Cable with Pinch Connector

Chapter 3 Installing the Switches

Connecting Network Devices

Step 1 Connect InfiniBand cables from the host to the InfiniBand switch.

a.To connect an InfiniBand cable, push the connector into the interface until you hear or feel a click. Figure 3-13shows an InfiniBand cable with a pinch connector, and Figure 3-14shows an InfiniBand cable with a pull connector.

Figure 3-13 InfiniBand Cable with Pinch Connector

10

144960

Figure 3-14 InfiniBand Cable with Pull Connector

12

144961

Note If your host does not provide an ample amount of space around an InfiniBand port, double-check that your InfiniBand cable connector engages fully. Move your connector back and forth to be sure that both sides of the connector have locked firmly into place.

b.To remove a cable with a pinch connector, pinch both sides of the back of the connector and pull the connector away from the port. (See Figure 3-15.)

	Cisco SFS 7000P and SFS 7000D InfiniBand Server Switches Hardware Installation Guide
OL-10853-01		3-13