11 Configure the settings relating to images and audio [Image/Audio]
11Configure the settings relating to images and audio [Image/Audio]
The image setting, JPEG and H.264 image settings, and settings relating to image quality, audio, etc. can be configured on this page.
The “Image/Audio” page has 4 tabs; the [JPEG/H.264] tab*1, the [Image/Position] tab, the [Audio] tab and the [Cam. Function] tab.
*1 | When “Image capture mode” is “VGA Quad streams [4:3]”, the [H.264] tab is displayed. |
|
11.1Configure the settings relating to images [JPEG/ H.264]
Click the [JPEG/H.264] tab on the “Image/Audio” page. (→page 51, page 53)
The following is a description of “Image capture mode”.
[Image capture mode]
Select an image to be displayed on the “Live” page.
The following “Image capture mode” settings can be configured depending on the mounting position. Refer to page 9 for further information about each “Image capture mode” setting.
–<Ceiling>
2M Double Panorama [16:9]/ 1M Double Panorama [16:9]/ 1.3M Quad PTZ [4:3]/ 1.3M Single PTZ [4:3]/ Double Panorama + Quad PTZ/ Double Panorama + Single PTZ
–<Wall>
2M Panorama [16:9]/ 1M Panorama [16:9]/ 1.3M Quad PTZ [4:3]/ 1.3M Single PTZ [4:3]/ Panorama + Quad PTZ/ Panorama + Single PTZ
–<Ceiling/Wall>
3M Fisheye [4:3]/ 1.3M Fisheye [4:3]
–<Ceiling>
VGA Quad streams [4:3]
•Default: 2M Double Panorama [16:9]
IMPORTANT
•For information on images that can be selected in “Image capture mode”, refer to page 9.
•If the “Image capture mode” setting is changed when the following area settings are configured, perform the area setting again.
–Privacy zone (→page 115)
–VMD area (→page 132)
–VIQS area (→page 117)
–Mask area (→page 106)
Operating Instructions
85
