3 Record images on the SD memory cardmanually
Images displayed on the “Live” page can be recorded on the SD memory card manually. This button is operable
only when “Manual” is selected for “Save trigger” on the [SD memory card] tab on the “Basic” page of the setup
menu. (®page 63)
It is possible to select “JPEG”, “H.264(1)”, or “H.264(2)” on “Recording format” of the setup menu.
(®page 61) When “JPEG” is selected for “Recording format”, still image data are recorded. When “H.
264(1)” or “H.264(2)” is selected, video data are recorded.
Images recorded on the SD memory card can be copied onto the PC. (®page 70)
Note
•When the “Image capture mode” type is Quad stream (Max. 30 fps), images cannot be saved on the
SD memory card.
•The resolution and other parameters that can be saved vary depending on “Image capture mode” on
the [JPEG/H.264] tab of the “Image/Audio” page. (®page 85)
•JPEG images from when the “Image capture mode” type is 2 Monitor (Max. 15 fps) become the type
of image configured in the “Image capture size” of “"Live" page (Initial display)”. (®page 87)
1. Display the “Live” page. (®page 7)
2. Click the [SD] button.
→The SD recording window will open.
Operating Instructions 35
3 Record images on the SD memory card manually