Panasonic WV-SF438E Destination of notification, Address 1 Address, Mail subject, Mail body

13 Configure the alarm settings [Alarm]

Note

•The settings for “Image capture size” of the “Alarm image” section on the [Alarm] tab (→page 126) will be applied to the size of the image to be attached.

•When “3M Fisheye [4:3]” or “VGA Quad streams [4:3]” is selected for “Image capture mode”, images cannot be attached.

Destination of notification

[Address 1] - [Address 4]

Enter the destination E-mail address. Up to 4 destination E-mail addresses can be registered.

•[Alarm] checkbox: When the checkbox is selected, the E-mail notification will be performed upon an alarm occurrence.

•[Diag.] checkbox: When the checkbox is selected, the E-mail notification will be provided in the following cases.

–When notification of the remaining capacity of the SD memory card has been provided

–When the SD memory card has become full

–When the SD memory card cannot be recognized

When “VGA Quad streams [4:3]” is selected for “Image capture mode”, the “Diag.” function cannot be used.

•[Destination E-mail address]: Enter the destination E-mail address.

–Available number of characters: 3 - 128 characters

–Available characters: Alphanumeric characters, the at sign (@), the period (.), the underscore (_), and the hyphen (-).

To delete the registered address, click the [Delete] button respective to the desired address.

[E-mail subject]

Enter the E-mail subject.

•Available number of characters: 0 - 50 characters

[E-mail body]

Enter the E-mail body.

•Available number of characters: 0 - 200 characters

Note

•Notification E-mail will be sent with the message “The capacity of the SD memory card is full.” when the SD memory card has become full, or “The SD memory card cannot be detected.” when mounting of the SD memory card failed.

13.8Configure the settings relating to Panasonic alarm protocol [Notification]

Click the [Notification] tab on the “Alarm” page. (→page 51, page 53)

Operating Instructions

137