3

Have Required Tools

The following tools are required for the installation of the MDMU hardware an cabling.

Phillips screwdriver (small and large)

Standard blade screwdriver (small and large)

Wire strippers (24 AWG - 12 AWG)

Telephone test set

Tone out circuit tester (optional, for troubleshooting)

Volt-ohm Meter (optional for troubleshooting)

4 wood screws, if mounted on wall

Installation Steps

1 Mount the MDMU to either a wall, cabinet or a rack (near the paging equipment if possible).

Figure 1. Wall Mounted Unit

2

Page 5
Image 5
Bogen LUMDMU manual Installation Steps, Have Required Tools