Bogen LUMDMU manual Playing Messages in Sequence, Press the Func button to select a message other

Playing Messages in Sequence

NOTE: If a contact closure comes in on the RJ-21 cable, the message sequence will stop. The contact closure message will play until the closure is removed. The sequence message will resume where it left off.

A group or sequence of messages can be played to the output channel. The maximum number of messages in a sequence can be up to 8 (determined by the DIP switch settings on the back panel). To add messages to the sequence simply repeat the PLAY command, selecting the message to be added each time.

1			Press the FUNC button until PLAY is displayed.
					PLAY
2		Press the RUN button.
					MSG-01
				The first message is displayed.
3	Press the FUNC button to select a message other
			than MSG-01 to play in:
					MSG-09
4		Press RUN to play (and group) the message.
					PLY-S09
				Ply = Play, S = sequence message #9.
5	Repeat steps 1 through 4 to add up to 8 messages if
			you are configured for 8 (see page 9).

11