2 Monitor images on a cellular phone/mobileterminal

2.1 Monitor images on a cellular phone

It is possible to connect to the camera using a cellular phone via the Internet and monitor images (JPEG only)
from the camera on the screen of the cellular phone.
IMPORTANT
•When the authentication window is displayed, enter the user name and password. The default user
name and password are as follows.
User name: admin
Password: 12345
To enhance the security, change the password for the user “admin”. (®page 144)
•If the cellular phone in use is not compatible with UTF-8 encode, it is impossible to display the screen
correctly.
•The following are the resolutions that can be displayed depending on “Image capture mode”.
Image capture mode type Image capture mode Image capture size
1 Monitor (Max. 30 fps) 2M Panorama [16:9] 640x360
320x180
1M Panorama [16:9]
2M Double Panorama [16:9]
1M Double Panorama [16:9]
1.3M Fisheye [4:3] VGA
QVGA
1.3M Quad PTZ [4:3]
1.3M Single PTZ [4:3]
2 Monitor (Max. 15 fps) Panorama + Quad PTZ Quad PTZ, Single PTZ:
VGA
QVGA
Panorama + Single PTZ
Double Panorama + Quad PTZ Panorama, Double Panorama:
640x360
320x180
Double Panorama + Single PTZ
Quad stream (Max. 30 fps) VGA Quad streams [4:3] -
3M Fisheye (Max. 15 fps) 3M Fisheye [4:3] -
Note
•It is necessary to configure the network settings of the cellular phone in advance to connect to the
Internet and monitor images from the camera. (®page 154)
1. Access to “http://IP address/mobile”*1 or “http://Host name registered in the DDNS server/mobile” using a
cellular phone.
→Images from the camera will be displayed.
24 Operating Instructions
2 Monitor images on a cellular phone/mobile terminal