11.5.5 Configure the settings relating to the privacy zone (“Privacyzone” setup menu)Click the [Setup>>] button of “Privacy zone” on the [Image/Position] tab of the “Image/Audio” page.
(®page 100)
When there is a zone that you do not want to display, set the zone as a privacy zone not to be displayed. Up
to 4 privacy zones can be set.
Note
•Depending on the “Image capture mode” setting, the following types of images are displayed.
–2M Panorama [16:9], 1M Panorama [16:9]: Panorama images are displayed.
–2M Double Panorama [16:9], 1M Double Panorama [16:9]: Double Panorama images are
displayed.
–Others: Fisheye images are displayed.
[Area]
The privacy zone will be set when an area is designated by dragging the mouse. Each zone can be overlapped.
Privacy zones 1, 2, 3, and 4 can be created and they will be numbered in the order of creation.
[Display type]
Select a display type of the privacy zone from the following.
•Gray: The privacy zones will be displayed in gray.
•Off: Does not display the privacy zones.
•Default: Off
Note
•Set the privacy zone larger than the size of an object to be hidden.
•Normally the color of the privacy zone is gray, however, the color may change due to the light control
settings.
[Close] button
Click this button to close the “Privacy zone” setup menu.
Operating Instructions 115
11 Configure the settings relating to images and audio [Image/Audio]