Panasonic WV-SF438 Configure the settings relating to audio Audio, Audio transmission/reception

11 Configure the settings relating to images and audio [Image/Audio]

11.6 Configure the settings relating to audio [Audio]

Click the [Audio] tab on the “Image/Audio” page. (→page 51, page 53)

The settings relating to audio can be configured on this page.

Note

•Images and audio will not be synchronized. Therefore, images and audio may not always match.

•Audio may be interrupted depending on the network environment.

[Audio transmission/reception]

Select the communication mode used for audio data transmission/reception between the camera and the PC from the following.

•Off: Does not receive/transmit audio between the camera and the PC. Therefore, the settings and controls relating to audio will be invalidated.

•Mic input: The PC receives audio data from the camera. Audio can be heard with images on the PC. Images and audio will not be synchronized.

•Audio output: Audio data from the PC will be transmitted to the camera. Audio can be heard from the speaker connected to the camera.

•Interactive(Half-duplex):Both reception and transmission are available. However, audio data cannot simultaneously be transmitted and received.

•Interactive(Full-duplex):Both reception and transmission are simultaneously available.

•Default: Off

Note

•Howling may be generated depending on usage conditions. If howling is generated, prevent sound generated by the PC from entering the PC microphone.

•When “Multicast” is selected for “Transmission type” on the [JPEG/H.264] tab of the “Image/Audio” page, audio transmission will become unavailable while monitoring H.264 images. To transmit audio from a PC to the camera, click the [JPEG] button on the “Live” page.

[Mic select] SF438

120

Operating Instructions