Cisco Systems WSC2960X24TDL Enabling CDP, on page, configure terminal 2. cdp run 3. end, Step

Configuring the Cisco Discovery Protocol

Enabling CDP

What to Do Next

You must reenable CDP to use it.

Related Topics

Enabling CDP, on page 37

Enabling CDP

CDP is enabled by default.

Note Switch clusters and other Cisco devices (such as Cisco IP Phones) regularly exchange CDP messages. Disabling CDP can interrupt cluster discovery and device connectivity.

Beginning in privileged EXEC mode, follow these steps to enable CDP when it has been disabled.

Before You Begin

CDP must be disabled, or it cannot be enabled.

SUMMARY STEPS

1.configure terminal

2.cdp run

3.end

DETAILED STEPS

	Command or Action	Purpose
Step 1	configure terminal	Enters the global configuration mode.

Example:

Switch# configure terminal

Step 2	cdp run	Enables CDP if it has been disabled.
	Example:
	Switch(config)# cdp run
Step 3	end	Returns to privileged EXEC mode.
	Example:
	Switch(config)# end

Catalyst 2960-X Switch Network Management Configuration Guide, Cisco IOS Release 15.0(2)EX

OL-29044-01 37