Cisco Systems WSC2960X24PDL show cdp entry entry-name version protocol, detail, show cdp traffic

Configuring the Cisco Discovery Protocol

Additional References

Command

show cdp entry entry-name[version] [protocol]

show cdp interface [interface-id]

Description

Displays information about a specific neighbor.

You can enter an asterisk (*) to display all CDP neighbors, or you can enter the name of the neighbor about which you want information.

You can also limit the display to information about the protocols enabled on the specified neighbor or information about the version of software running on the device.

Displays information about interfaces where CDP is enabled.

You can limit the display to the interface about which you want information.

show cdp neighbors [interface-id]	Displays information about neighbors, including device type,
[detail]	interface type and number, holdtime settings, capabilities,
	platform, and port ID.
	You can limit the display to neighbors of a specific interface or
	expand the display to provide more detailed information.
show cdp traffic	Displays CDP counters, including the number of packets sent
	and received and checksum errors.

Related Topics

Configuring CDP Characteristics, on page 34

Additional References

Related Documents
Related Topic	Document Title
System Management Commands	Cisco IOS Configuration Fundamentals Command
	Reference, Cisco IOS XE Release 3S (Catalyst 3850
	Switches)

MIBs
MIB	MIBs Link

To locate and download MIBs for selected platforms,

Cisco IOS releases, and feature sets, use Cisco MIB

Locator found at the following URL:

http://www.cisco.com/go/mibs

Catalyst 2960-X Switch Network Management Configuration Guide, Cisco IOS Release 15.0(2)EX

OL-29044-01 41