Cisco Systems WSC2960X24TSLL Limiting TFTP Servers Used Through SNMP, snmp-server contact text

Configuring Simple Network Management Protocol

Limiting TFTP Servers Used Through SNMP

DETAILED STEPS

	Command or Action	Purpose
Step 1	configure terminal	Enters the global configuration mode.

Example:

Switch# configure terminal

Step 2	snmp-server contact text	Sets the system contact string.
	Example:
	Switch(config)# snmp-server contact Dial System Operator
	at beeper 21555
Step 3	snmp-server location text	Sets the system location string.
	Example:
	Switch(config)# snmp-server location Building 3/Room
	222
Step 4	end	Returns to privileged EXEC mode.
	Example:
	Switch(config)# end

Limiting TFTP Servers Used Through SNMP

Beginning in privileged EXEC mode, follow these steps to limit the TFTP servers used for saving and loading configuration files through SNMP to the servers specified in an access list.

SUMMARY STEPS

1.configure terminal

2.snmp-server tftp-server-list access-list-number

3.access-listaccess-list-number {deny permit} source [source-wildcard]

4.end

Catalyst 2960-X Switch Network Management Configuration Guide, Cisco IOS Release 15.0(2)EX

OL-29044-01 61