Cisco Systems WSC2960X24TDL Enabling a Partial Configuration for Cisco IOS CNS Agent, Step, end

Configuring Cisco IOS Configuration Engine

Enabling a Partial Configuration for Cisco IOS CNS Agent

	Command or Action	Purpose
Step 9	Make sure that you have reestablished the connection
	between the switch and the event connection by
	examining the output from show cns event connections.

Related Topics

Enabling the Cisco IOS CNS Agent, on page 22

Hostname and DeviceID, on page 17

Enabling a Partial Configuration for Cisco IOS CNS Agent

Beginning in privileged EXEC mode, follow these steps to enable the Cisco IOS CNS agent and to initiate a partial configuration on the switch.

SUMMARY STEPS

1.configure terminal

2.cns config partial {ip-address hostname} [port-number] [source ip-address]

3.end

DETAILED STEPS

	Command or Action	Purpose
Step 1	configure terminal	Enters the global configuration mode.
	Example:
	Switch# configure terminal

Step 2	cns config partial {ip-addresshostname}
	[port-number] [source ip-address]

Example:

Switch(config)# cns config partial 172.28.129.22 2013

Enables the configuration agent, and initiates a partial configuration.

•For {ip-address hostname}, enter the IP address or the hostname of the configuration server.

•(Optional) For port-number, enter the port number of the configuration server. The default port number is 80.

•(Optional) Enter source ip-addressto use for the source IP address.

Note Though visible in the command-line help string, the encrypt keyword is not supported.

	Catalyst 2960-X Switch Network Management Configuration Guide, Cisco IOS Release 15.0(2)EX
30	OL-29044-01