Cisco Systems WSC2960X24PSL exit, Returns to global configuration mode, template name ... name

Configuring Cisco IOS Configuration Engine

Enabling an Initial Configuration for Cisco IOS CNS Agent

	Command or Action	Purpose
Step 5	exit	Returns to global configuration mode.
	Example:
	Switch(config)# exit

Step 6 cns connect name [retries number] [retry-interval seconds] [sleep seconds] [timeout seconds]

Example:

Switch(config)# cns connect dhcp

Step 7 discover {controller controller-typedlci

[subinterface subinterface-number] interface [interface-type] line line-type}

Example:

Switch(config-cns-conn)# discover

interface gigabitethernet

Step 8 template name [... name]

Example:

Switch(config-cns-conn)# template template-dhcp

Step 9 Repeat Steps 7 to 8 to specify more interface parameters and CNS connect templates in the CNS connect profile.

Enters CNS connect configuration mode, specifies the name of the CNS connect profile, and defines the profile parameters. The switch uses the CNS connect profile to connect to the Configuration Engine.

•Enter the name of the CNS connect profile.

•(Optional) For retries number, enter the number of connection retries. The range is 1 to 30. The default is 3.

•(Optional) For retry-intervalseconds, enter the interval between successive connection attempts to the Configuration Engine. The range is 1 to 40 seconds. The default is 10 seconds.

•(Optional) For sleep seconds, enter the amount of time before which the first connection attempt occurs. The range is 0 to 250 seconds. The default is 0.

•(Optional) For timeout seconds, enter the amount of time after which the connection attempts end. The range is 10 to 2000 seconds. The default is 120.

Specifies the interface parameters in the CNS connect profile.

•For controller controller-type, enter the controller type.

•For dlci, enter the active data-link connection identifiers (DLCIs).

(Optional) For subinterface subinterface-number, specify the point-to-point subinterface number that is used to search for active DLCIs.

•For interface [interface-type], enter the type of interface.

•For line line-type, enter the line type.

Specifies the list of CNS connect templates in the CNS connect profile to be applied to the switch configuration. You can specify more than one template.

Catalyst 2960-X Switch Network Management Configuration Guide, Cisco IOS Release 15.0(2)EX

OL-29044-01 25