Cisco Systems WSC2960X24PSL Setting the Agent Contact and Location Information, What to Do Next

Configuring Simple Network Management Protocol

Setting the Agent Contact and Location Information

	Command or Action	Purpose
Step 9	snmp-server trap-timeout seconds	(Optional) Define how often to resend trap messages. The range is 1
		to 1000; the default is 30 seconds.
	Example:
	Switch(config)# snmp-server trap-timeout
	60
Step 10	end	Returns to privileged EXEC mode.
	Example:
	Switch(config)# end

What to Do Next

The snmp-server host command specifies which hosts receive the notifications. The snmp-server enable trap command globally enables the method for the specified notification (for traps and informs). To enable a host to receive an inform, you must configure an snmp-server host informs command for the host and globally enable informs by using the snmp-server enable traps command.

To remove the specified host from receiving traps, use the no snmp-server host host global configuration command. The no snmp-server host command with no keywords disables traps, but not informs, to the host. To disable informs, use the no snmp-server host informs global configuration command. To disable a specific trap type, use the no snmp-server enable traps notification-typesglobal configuration command.

Setting the Agent Contact and Location Information

Beginning in privileged EXEC mode, follow these steps to set the system contact and location of the SNMP agent so that these descriptions can be accessed through the configuration file.

SUMMARY STEPS

1.configure terminal

2.snmp-server contact text

3.snmp-server location text

4.end

	Catalyst 2960-X Switch Network Management Configuration Guide, Cisco IOS Release 15.0(2)EX
60	OL-29044-01