Cisco Systems WSC2960X24TDL, WSC2960X48TSL, WSC2960X24PSL manual Editing Command Lines That Wrap

Using the Command-Line Interface

Enabling and Disabling Editing Features

Esc D	Deletes from the cursor to the end of the word.
Esc C	Capitalizes at the cursor.
Esc L	Changes the word at the cursor to lowercase.
Esc U	Capitalizes letters from the cursor to the end of the
	word.
Ctrl-V or Esc Q	Designates a particular keystroke as an executable
	command, perhaps as a shortcut.
Return key	Scrolls down a line or screen on displays that are
	longer than the terminal screen can display.
	Note	The More prompt is used for any output that
		has more lines than can be displayed on the
		terminal screen, including show command
		output. You can use the Return and Space
		bar keystrokes whenever you see the More
		prompt.
Space bar	Scrolls down one screen.
Ctrl-L or Ctrl-R	Redisplays the current command line if the switch
	suddenly sends a message to your screen.

Editing Command Lines That Wrap

You can use a wraparound feature for commands that extend beyond a single line on the screen. When the cursor reaches the right margin, the command line shifts ten spaces to the left. You cannot see the first ten characters of the line, but you can scroll back and check the syntax at the beginning of the command. The keystroke actions are optional.

To scroll back to the beginning of the command entry, press Ctrl-Bor the left arrow key repeatedly. You can also press Ctrl-Ato immediately move to the beginning of the line.

Note The arrow keys function only on ANSI-compatible terminals such as VT100s.

The following example shows how to wrap a command line that extend beyond a single line on the screen.

SUMMARY STEPS

1.access-list

2.Ctrl-A

3.Return key

Catalyst 2960-X Switch Network Management Configuration Guide, Cisco IOS Release 15.0(2)EX

OL-29044-01 9