Cisco Systems WSC2960X48TSL, WSC2960X24TDL manual Model, Level, Authentication, Encryption, Result

Configuring Simple Network Management Protocol

Prerequisites for SNMP

Model	Level	Authentication	Encryption	Result
SNMPv3	noAuthNoPriv	Username	No	Uses a username
				match for
				authentication.
SNMPv3	authNoPriv	Message Digest 5	No	Provides
		(MD5) or Secure		authentication based
		Hash Algorithm		on the HMAC-MD5
		(SHA)		or HMAC-SHA
				algorithms.
SNMPv3	authPriv	MD5 or SHA	Data Encryption	Provides
			Standard (DES) or	authentication based
			Advanced	on the HMAC-MD5
			Encryption Standard	or HMAC-SHA
			(AES)	algorithms.
				Allows specifying
				the User-based
				Security Model
				(USM) with these
				encryption
				algorithms:
				• DES 56-bit
				encryption in
				addition to
				authentication
				based on the
				CBC-DES
				(DES-56)
				standard.
				• 3DES 168-bit
				encryption
				• AES 128-bit,
				192-bit, or
				256-bit
				encryption

You must configure the SNMP agent to use the SNMP version supported by the management station. Because an agent can communicate with multiple managers, you can configure the software to support communications using SNMPv1, SNMPv2C, or SNMPv3.

Catalyst 2960-X Switch Network Management Configuration Guide, Cisco IOS Release 15.0(2)EX

OL-29044-01 45