IMPORTANT
•VMD is deactivated while the initial position setup menu is displayed. Close the initial position setup
menu after completing the settings.
•If the initial position setting of panorama, double panorama, or fisheye images is changed when the
following areas are configured, the areas must be configured again.
–Privacy zone (®page 115)
–VMD area (®page 132)
–VIQS area (®page 117)
–Mask area (®page 106)
Note
•When the “Image capture mode” type is 2 Monitor (Max. 15 fps), the initial position of Panorama and
Double Panorama cannot be configured. In order to change the initial position, change the “Image
capture mode” type to 1 Monitor (Max. 30 fps), select “2M Panorama [16:9]” or “2M Double Panorama
[16:9]” for “Image capture mode”, configure the initial position, and then return the “Image capture
mode” type to 2 Monitor (Max. 15 fps).
For Panorama images
[Position adjust] buttons
•: Makes fine adjustments to the display position in a counterclockwise direction.
•: Makes fine adjustments to the display position in a clockwise direction.
•: Adjusts the display position upward.
•: Adjusts the display position downward.
[Set] button
Saves the adjusted screen position.
Operating Instructions 111
11 Configure the settings relating to images and audio [Image/Audio]