3 Record images on the SD memory card manually

3.Click the [Start] button to start recording images on the SD memory card. The SD recording status indicator will light red (page 18) while images are being recorded on the SD memory card.

The image saving interval can be configured on the [SD memory card] tab of the “Basic” page. (page 61)

4.Click the [Stop] button to stop saving images on the SD memory card. The SD recording status indicator will turn off.

5.Click the [Close] button to close the window.

Note

Image data saved on Drive B can be obtained by executing “Access img.” on the [SD memory card] tab and logging in from the user authentication window (page 70).

The destination to save image data is a fixed directory on Drive B. Refer to “Directory structure of drive B” (page 221).

When the [Start] button is clicked immediately after the [Stop] button is clicked, saving of images may not start. In this case, click the [Start] button again.

36

Operating Instructions

Page 36
Image 36
Panasonic WV-SF438E operating instructions Record images on the SD memory card manually