
15 Configure the settings relating to the authentication [User mng.]
Note
•When the [Authentication] setting has been changed, close the web browser, and then access the camera again.
•For other devices such as network disk recorders, unless otherwise stated, Digest authentication is not supported. (As of September, 2012)
[User name]
Enter a user name.
•Available number of characters: 1 - 32 characters
•Unavailable characters: " & : ; \
•Default: None (blank)
[Password] [Retype password]
Enter a password.
•Available number of characters: 4 - 32 characters
•Unavailable characters: " &
•Default: None (blank)
Note
•When the user name already in use is entered and the [Set] button is clicked, the respective user information will be overwritten.
[Access level]
Select the access level of the user from the following.
•1. Administrator: Allowed all available operations of the camera.
•2. Camera control: Allowed to display images from the camera and to control the camera. The camera setting configuration is unavailable.
•3. Live only: Only displaying live images is available. The camera setting configuration and camera control are unavailable.
•Default: 3. Live only
[User check]
From the
The registered user will be displayed with the access level. (Example: admin [1])
To delete the registered user, click the [Delete] button after selecting the user to be deleted.
15.2Configure the settings relating to the host authentication [Host auth.]
Click the [Host auth.] tab on the “User mng.” page. (→page 51, page 53)
Operating Instructions
145