13 Configure the alarm settings [Alarm]
The settings relating to Panasonic alarm protocol can be configured in this section.
Panasonic alarm protocol notification
[Panasonic alarm protocol]
Select “On” or “Off” to determine whether or not to provide notification by Panasonic alarm protocol according to the settings for the “Alarm” and “Diag.” checkboxes of “Destination of notification” below.
–When an alarm is detected (“Alarm”)
–When a notification of the remaining capacity of the SD memory card has been provided (“Diag.”)
–When the SD memory card has become full (“Diag.”)
–When the SD memory card cannot be recognized (“Diag.”)
•Default: Off
Note
•When “On” is selected, notification of the alarm occurrence will be provided to the registered destination server addresses in order (to IP address 1 first, to IP address 8 last).
138
