read from the settings in “H.264(1)” or “H.264(2)”. When “2s”, “3s”, “4s” or “5s” is selected for “Refresh
interval” of “H.264(1)” or “H.264(2)”, “Refresh interval” for “H.264 recording” will be set to “1s” after
changing “Recording format” to “H.264(1)” or “H.264(2)”. When “8192kbps”, “10240kbps”,
“12288kbps”, or “14336kbps” is set for “Max bit rate” in “H.264(1)”, “Max bit rate” for “H.264
recording” will be set for “4096kbps” after changing the “Recording format” to “H.264(1)”.
•When the selection for “Recording format” is changed to “H.264(1)” or “H.264(2)”, the setting of “Save
logs” (the [Log] tab on the “Basic” page ®page 79) is changed together.
•When “H.264(1)” or “H.264(2)” is selected for “Recording format”, alarm images are saved in
accordance with the settings of “Pre alarm” and “Post alarm (recording) duration” on the [Alarm] tab of
the “Alarm” page.
•When “H.264(1)” or “H.264(2)” is selected for “Recording format”, the name of the saved file will be
given automatically.
Common[Remaining capacity notification]
When the E-mail notification function or the Panasonic alarm protocol function is used to provide notification
of the remaining capacity of the SD memory card, select a level to be notified at from the following.
50%/ 20%/ 10%/ 5%/ 2%
•Default: 50%
Note
•Notification will be provided each time the remaining capacity of the SD memory card reached the
values above.
For example, notification will be provided each time the remaining capacity reaches 50%, 20%, 10%,
5% and 2% when “50%” is selected. Notification may not always be made at the very moment when
the remaining capacity of the SD memory card has reached each value.
[Save trigger]
Select a trigger to save images on the SD memory card from the following.
•FTP error: Saves images when images have failed to transmit to the FTP server by the FTP periodic image
transmission function. Available only for JPEG images.
•Alarm input: Saves images at an alarm occurrence.
•Manual: Saves images manually.
•Schedule: Saves images in accordance with the settings for “Schedule” (®page 191). Available only for
H.264 images.
•Default: FTP error
Note
•When “H.264(1)” or “H.264(2)” is selected for “Recording format”, “FTP error” is unavailable.
•Select “FTP error” when images are to be transmitted to the FTP server at an alarm occurrence.
•When “Manual” or “Schedule” is selected when “H.264(1)” or “H.264(2)” is selected for “Recording
format”, even if “Save logs” (®page 79) of “Alarm” is set to “On”, detected alarm logs are not recorded
in the log list.
•When “JPEG” is selected for “Recording format”, “Schedule” is unavailable.
•When “3M Fisheye [4:3]” is selected for “Image capture mode”, “FTP error” is unavailable.
[Overwrite]
Determine whether or not to overwrite when the remaining capacity of the SD memory card becomes
insufficient.
This setting is available only when “Manual” or “Schedule” is selected for “Save trigger”.
•On: Overwrites when the remaining capacity of the SD memory card becomes insufficient. (The oldest
image is the first to be overwritten.)
Operating Instructions 63
10 Configure the basic settings of the camera [Basic]