Panasonic WV-SF438E Mail notification, Mail server, Alarm image attachment

13 Configure the alarm settings [Alarm]

13.7Configuration of the settings relating to the E-mail notification [Notification]

Click the [Notification] tab on the “Alarm” page. (→page 51, page 53)

The settings relating to the alarm E-mail can be configured. It is necessary to configure the settings of the E-mail server to perform the E-mail notification. (→page 149)

E-mail notification

[E-mail server >>]

When “E-mail server >>” is clicked, the [E-mail] tab of the “Server” page will be displayed. (→page 149)

[E-mail notification]

Select “On” or “Off” to determine whether or not to provide notification by E-mail according to the settings for the “Alarm” and “Diag.” checkboxes of “Destination of notification” below.

–When an alarm is detected (“Alarm”)

–When a notification of the remaining capacity of the SD memory card has been provided (“Diag.”)

–When the SD memory card has become full (“Diag.”)

–When the SD memory card cannot be recognized (“Diag.”)

•Default: Off

[Alarm image attachment]

Select “On” or “Off” to determine whether or not to attach an image to the E-mail to be sent when an alarm is detected.

•Default: Off

136

Operating Instructions