11 Configure the settings relating to images and audio [Image/Audio]

Note

When the [Reset] button is clicked, masking for all the masked areas will be canceled.

11.5.3 Configure the preset positions (Preset position setup menu)

Click the [Setup>>] button of “Preset position” on the [Image/Position] tab of the “Image/Audio” page (page 100).

It is possible to register, edit and delete the preset positions on this page.

When the position and zoom factor are adjusted, the adjustment will be applied immediately to the currently displayed image on the [Image/Position] tab.

IMPORTANT

This function is available when a “Image capture mode” setting containing Single PTZ or Quad PTZ is selected. (page 9) Specifically, the following options can be selected for “Image capture mode”. 1.3M Quad PTZ [4:3]/ 1.3M Single PTZ [4:3]/ Panorama + Quad PTZ/ Panorama + Single PTZ/ Double Panorama + Quad PTZ/ Double Panorama + Single PTZ

Note

“Preset position” can be set up to a maximum of 16 positions.

Only Single PTZ image is displayed.

Even when the image type is Quad PTZ, when the preset position screen is displayed, Single PTZ images are displayed. In this case all transmissions are sent with Single PTZ images.

When you return to the “Live” page from the “Preset position” setup menu, the home position image is displayed.

Operating Instructions

109

Page 109
Image 109
Panasonic WV-SF438E operating instructions Configure the preset positions Preset position setup menu