COMPUTER INPUT
PICTURE SCREEN ADJUSTMENT
This projector has a picture screen resize function, which enables you to display desirable image size.
PICTURE SCREEN SELECT (DIRECT)
Select picture screen among Normal, Full, True, Digital zoom + and Digital zoom - by pressing SCREEN button on Remote Control Unit.
SCREEN button
Normal
Full
True
Digital zoom +
Digital zoom -
| PICTURE SCREEN SELECT (MENU) | |
1 | Press MENU button and | SCREEN MENU |
| POINT LEFT/RIGHT button(s) to move a red frame pointer to |
|
SCREEN Menu icon.
2 | Press POINT DOWN button and move a red frame pointer to |
function that you want to select and then press SELECT button. |
Normal
Provides image to fit the panel size of the screen.
Full
Provides image to fit the horizontal size of the screen.
True
Provides image in its original size. When the original image size is larger than screen size (1366 x 768), this projector enters “Digital Zoom +” mode automatically.
Digital zoom +
When Digital zoom + is selected,
A projected image can be also expanded by pressing D.ZOOM ▲ button on Remote Control Unit.
Digital Zoom –
When Digital zoom – is selected,
A projected image can be also compressed by pressing D.ZOOM ▼ button on Remote Control Unit.
To cancel Digital Zoom +/– mode, press any button except D.ZOOM
▲/▼, SELECT, POINT and AUTO PC ADJ. buttons.
SCREEN Menu icon
Move red frame to function and press SELECT button.
NOTE
●True and Digital zoom +/– cannot be operated when “RGB”, “1035i (HDTV)” or “1080i (HDTV)” is selected on PC SYSTEM Menu (P23).
●Full cannot be selected when “720p (HDTV)”, “1035i (HDTV)” or “1080i (HDTV)” is selected on PC SYSTEM Menu (P23).
●This projector cannot display any resolution higher than 1280 X 1024. If your computer’s screen resolution is higher than 1280 X 1024, reset resolution to lower before connecting projector.
●Image data in other than XGA (1024 x 768) is modified to fit screen size in initial mode.
●Panning function may not operate properly if computer system prepared on PC ADJUST Menu is used.
30
