CONNECTING PROJECTOR
TERMINALS OF PROJECTOR
This projector has input and output terminals on its back for connecting computers and video equipment. Refer to figures on pages 11 to 13 and connect properly.
COMPUTER AUDIO
INPUT (1 and 2) JACKS
Connect an audio output (stereo) from computer to these jacks.
(Refer to P12.)
COMPUTER INPUT
TERMINALS (DIGITAL/ANALOG)
Connect computer (digital/analog) output to one of these terminals. (Refer to P12.)
INPUT 1
ANALOGDIGITAL(DVI-D)
R/C JACK
R/C JACK
When using Wired/Wireless Remote Control Unit as Wired Remote Control, Connect Wired Remote Control Unit to this jack with Remote Control Cable (supplied).
RESET BUTTON
This projector uses a micro processor to control this unit, and occasionally, this micro processor may malfunction and need to be reset. This can be done by pressing RESET button with a pen, which will shut down and restart unit. Do not use RESET function excessively.
AUDIO 1 | RESET | CONTROL PORT | ||
| AUDIO 2 |
| ||
G | B | R | H/V | V |
VIDEO/Y | Cb/Pb | Cr/Pr |
|
|
|
| INPUT 2 |
|
|
VIDEO/Y Cb/Pb Cr/Pr | ||||
| ||||
|
|
| (MONO) |
|
|
| INPUT 3 |
|
|
CONTROL PORT CONNECTOR
When controlling this projector by computer, connect your computer to this terminal.
(Refer to P12.)
✽Do not press this button. This button is used for our optional accessories.
5 BNC INPUT JACKS
Connect component video output (Y, Cb, Cr or Y, Pb, Pr) from video equipment to VIDEO/Y, Cb/Pb and Cr/Pr jacks or connect computer output {5 BNC Type (Green, Blue, Red, Horiz. Sync and Vert. Sync.)} from computer to G, B, R, H/V and V jacks. (Refer to P12 and 13.)
VIDEO INPUT JACKS |
| AUDIO INPUT JACKS |
| |
Connect composite video | Connect an audio output |
| Connect | |
output from video equipment | from video equipment to |
| output from video | |
to VIDEO/Y jack or connect | these jacks. |
| equipment to this | |
component video outputs to | (Refer to P13.) |
| jack. (Refer to P13.) | |
VIDEO/Y, Cb/Pb and Cr/Pr |
|
|
| |
jacks. (Refer to P13.) |
|
|
| |
11
