Sanyo PLV-70 owner manual Video Input Image Level Adjustment, Color, Tint

VIDEO INPUT

IMAGE LEVEL ADJUSTMENT

1	Press MENU button and ON-SCREEN MENU will appear.
	Press POINT LEFT/RIGHT button(s) to move a red frame
	pointer to IMAGE ADJUST Menu icon.
2	Press POINT DOWN button to move a red frame pointer to
	item that you want to adjust and then press SELECT button.

Level of each item is displayed. Adjust each level by pressing POINT LEFT/RIGHT button(s).

Contrast

Press POINT LEFT button to decrease contrast, and POINT RIGHT button to increase contrast. (From 0 to 63.)

Brightness

Press POINT LEFT button to adjust image darker, and POINT RIGHT button to adjust brighter. (From 0 to 63.)

Color

Press POINT LEFT button to lighten color, and POINT RIGHT button to deeper color. (From 0 to 63.)

Tint

Press POINT LEFT button or POINT RIGHT button to obtain proper color. (From 0 to 63.)

Color Management

The Color management function can be used to adjust the level, phase and gamma of the selected display colors on the screen, and to replace these colors with other colors if required.

The projector lets you replace up to eight colors for each image. There are four preset images for VIDEO mode and four preset images for PC, giving a total of eight images.

1	Press the POINT DOWN button to move the red frame pointer to
	"COLOR MANAGEMENT", and then press the SELECT button.
	The COLOR MANAGEMENT menu will appear and pointer
	mode will be enabled. The image that was being projected when
	the button was pressed will be paused, and the COLOR MAN-
	AGEMENT POINTER will appear.
2	Use the POINT buttons to move the pointer to a section of the
	paused image that contains the color that you would like to
	adjust, and then press the SELECT button. The mode will
	change to COLOR SELECTION mode, and the color in the cen-
	ter of the pointer will be selected and adjustment will be possible.
3	Use the POINT buttons to adjust the level and phase of the
	color, and then press the SELECT button to confirm the setting.
	Next, use the POINT buttons to adjust the gamma correction for
	the color, and then press the SELECT button to accept the set-
	ting. When the SELECT button is pressed, the mode will change
	to LIST mode.
4	To move the red frame pointer to "MENU", and then press the
	SELECT button. The message "OK"? is displayed. Move the

pointer to [Yes] and then press SELECT button. The COLOR MANAGEMENT menu will be exited and the display will return to the IMAGE ADJUST menu. (At this time, the image will stop being paused and normal projection will resume.) After chang- ing the COLOR MANAGEMENT settings, use the IMAGE ADJUST menu to store the changed settings.

COLOR SELECTION MODE

CANCEL

The mode will return to the pointer mode (even if you press the MENU key on the projector or the remote control). (You will need to reselect and re-adjust the color in this case.)

IMAGE ADJUST MENU

Move a red frame pointer to	IMAGE ADJUST
	Menu icon
item to be selected and then
press SELECT button.

32
32	Press POINT LEFT/RIGHT buttons
32	to adjust value.
32

L1

Press SELECT button at this icon to display other items.

POINTER MODE

COLOR

MANAGEMENT

POINTER

NOTE;

Press the COLOR M. button on the remote con- trol to display the COLOR MANAGEMENT menu. If you would like to check or re-adjust a color management setting that has already been made, press the COLOR M. button on the remote control once more to change to LIST mode.

COLOR SELECTION

MODE

Level and phase	Gamma
adjustment palette.	adjustment palette.

LIST CANCEL QUIT

34