Onkyo PR-SC885 Muting Zones, Adjusting the Tone of Zone, Zone 2 and Zone 3—Continued, Notes

Zone 2 and Zone 3—Continued

Muting Zones

ZONE3

ZONE2

MUTING

On the remote controller, press the [ZONE 2] or [ZONE 3] REMOTE MODE button, and then press the [MUTING] button.

To unmute a zone, on the remote controller, press the [ZONE 2] or [ZONE 3] REMOTE MODE button, and then press the [MUTING] but- ton again.

Adjusting the Tone of Zone 2

1 On the AV controller, press the

[ZONE 2] button.

AV controller

ZONE 2

2 TONE

Press the AV controller’s [TONE] button repeatedly to select Bass or Treble.

3 Use the Up [ ] and Down [] buttons to adjust the bass or tre- ble.

You can boost or cut the Bass or Treble from –10 dB to +10 dB in 1 dB steps.

Notes:

•Zones can also be unmuted by adjusting the volume.

•The tone cannot be adjusted for Zone 3.

•The Zone 2 level, balance, and tone functions have no effect on the ZONE 2 PRE OUT when the Zone 2 Out setting is set to Fixed (page 110).

•The Zone 3 level and balance functions have no effect on the ZONE 3 PRE OUT when the Zone 3 Out set- ting is set to Fixed (page 110).

113