Onkyo PR-SC885 102, IntelliVolume, Name Edit, Sync, You want to give a custom name

Advanced Setup—Continued

6		When you’ve finished, press the
		[SETUP] button.
SE	T	Setup closes.
	UP

IntelliVolume

With IntelliVolume, you can set the input level for each input selector individually. This is useful if one of your source components is louder or quieter than the others.

Use the Left and Right []/[ ] buttons to set the level.

If a component is noticeably louder than the others, use the Left [] button to reduce its input level. If it’s noticeably quieter, use the Right [ ] button to increase its input level. The input level can be adjusted from –12 dB to +12 dB in 1 dB steps.

Note:

Name Edit

You can enter a custom name for each individual input selector and radio preset for easy identification. When selected, the custom name will appear on the display.

1	Select the input selector to which
	you want to give a custom name.
	To name a radio preset, use the
	[TUNER] button to select AM or FM,
	and then select the preset.
2	Press the [RECEIVER] REMOTE
	MODE button, followed by the
RECEIVER	[SETUP] button.
S
E
T
UP

• IntelliVolume does not apply for Zone 2 or Zone 3.

A/V Sync

When using your DVD player’s progressive scanning function, you may find that the picture and sound are out of sync. With the A/V Sync setting, you can correct this by applying a delay to the audio signal. The delay can be set from 0 to 250 milliseconds (msec) in 5 millisecond steps.

Use the Up and Down []/[ ] buttons to select an

3

ENTER

ENTER

Use the Up and Down []/[ ] buttons to select “4. Source Setup,” and then press [ENTER].

The Source Setup menu appears.

4.Source Setup

DVD

1.IntelliVolume 2.A/V Sync 3.Name Edit 4.Satellite Radio 5.SIRIUS Parental Lock

input selector, and use the Left and Right [ ]/[ ] but- tons to set the delay.

To view the TV picture while setting the delay, press [ENTER].

4-2.A/V Sync
	DVD
A/V Sync		100msec
(HDMI LipSync		60msec)
Press Enter to see picture

If HDMI Lip Sync is enabled (see page 107), and your TV or display supports HDMI Lip Sync, the displayed delay time will be the A/V Sync delay time. The HDMI Lip Sync delay time is displayed underneath in parenthe- ses.

Note:

•A/V Sync cannot be set when the Pure Audio listening mode is selected, or when the Direct listening mode is

used with an analog input source.

4		Use the Up and Down [		]/[ ]
		buttons to select “Name Edit,”
		and then press [ENTER].
	ENTER	The Name Edit screen appears.
		4-3.Name Edit
			DVD
		Display		Default
		Name	[	]
	ENTER

If you’re naming an item for the very first time, go to step 6.

If the item already has a name, you can select Default or Custom in step 5.

102