Onkyo PR-SC885 Zone 2 and Zone 3—Continued, Zone 2/Zone 3 Out Settings, Connecting Zone, Hookup

Zone 2 and Zone 3—Continued

Connecting Zone 3 Zone 2/Zone 3 Out Settings

Zone 3 speakers must be connected to an amp in Zone 3.

Connecting Your Zone 3 Speakers

You can enjoy 2-channel stereo playback in Zone 3 and a different source to those selected for your main room and Zone 2.

Hookup

•Use an RCA audio cable to connect the AV control- ler’s ZONE 3 PRE OUT L/R jacks to an analog audio input on your Zone 3 amp.

•Use an RCA audio cable to connect the AV control- ler’s ZONE 3 PRE OUT SW jack to the line input on a powered subwoofer in Zone 3.

•Connect your Zone 3 speakers to the speaker termi- nals on your Zone 3 amp.

If you’ve connected your Zone 2 or Zone 3 speakers to an amp with no volume control, set the Zone 2 Out or Zone 3 Out setting, respectively, to Variable so that you can set the zone’s volume, balance, and tone on the AV controller.

1	Press the [RECEIVER] REMOTE
RECEIVER	MODE button, followed by the
	[SETUP] button.
	The main menu appears onscreen.
S
E
T
UP

Main room			2		Use the Up and Down [	]/[	]
					buttons to select “7. Hardware
				ENTER	Setup,” and then press [ENTER].
	Multichannel power amp				The Hardware Setup menu appears.
				ENTER
	AV controller
		ZONE 3	3		Use the Up and Down [	]/[	]
		SW
					buttons to select “2. Zone 2/
		L			Zone 3,” and then press [ENTER].
				ENTER
		R			The Zone 2/Zone 3 screen appears.
		PRE OUT
					7-2.Zone2/Zone3
Zone 3					Zone2 Out	Fixed
					Zone3 Out	Fixed
				ENTER
	LINE INPUT
		IN
Powered	R	L
subwoofer			4
	Receiver/				Use the Up and Down [	]/[	]
					buttons to select “Zone 2 Out” or
	integrated amp				“Zone 3 Out,” and use the Left

	ENTER
Note:	and Right [ ]/[ ] buttons to
	select:
• With the default settings, the Zone 3 volume must be
	Fixed: The Zone 2 or Zone 3 volume
set on the Zone 3 amp. If your Zone 3 amp has no vol-
	must be set on the amp in that
ume control, set the Zone 3 Out setting to Variable so
	zone.
that you can set the Zone 3 volume on the AV control-
	Variable: The Zone 2 or Zone 3 vol-
ler (see page 110).
	ENTER
	ume can be set on the AV con-
	troller.

110