Onkyo PR-SC885 Hdmi Input Setup, Use the Up and Down / buttons to select 2. Hdmi Input

First Time Setup—Continued

HDMI Input Setup

3

Use the Up and Down []/[ ] buttons to select “2. HDMI Input,”

2, 3

1, 5

1

DVD

TV

DIMMER

+

CH

DISC

ALBUM

-

PREV

CH

DISPLAY

		2			3			ZONE3
	REMOTE MODE
	VCR			CD				ZONE2
				CDR/MD
CABLE				DOCK				RECEIVER
	SAT							TAPE/AMP
								SLEEP
			ENU	M	EN
		M				U
OP
T
			ENTER					VOL
	G		UIDE	IT
S				EX		R
	E	TUP			U		N
				RET

MUTING

1

2–4

ENTER

ENTER

and then press [ENTER].

The HDMI Input menu appears.

1-2.HDMI Input

DVD	---
VCR/DVR	---
CBL/SAT	---
GAME/TV	---
AUX1	---
AUX2	---

If you connect a video component to an HDMI IN, you must assign that input to an input selector. For example, if you connect your DVD player to HDMI IN 1, you must assign HDMI IN 1 to the DVD input selector.

By default, none of the HDMI inputs are assigned. The following input selectors can be assigned: DVD, VCR/DVR, CBL/SAT, GAME/TV, AUX 1, AUX 2.

If you’ve connected your TV to the AV controller with an HDMI cable, you can set the AV controller so that com- posite video, S-Video, and component video sources are upconverted (*) and output by the HDMI outputs. You can set this for each input selector by selecting the

“- - -” option.

Composite video, S-Video,
component video	HDMI
IN
(*)
OUT
Composite video, S-Video,	HDMI
component video

1	Press the [RECEIVER] button,
RECEIVER	followed by the [SETUP] button.
	The main menu appears onscreen.
S
E
T
UP
2	Use the Up and Down [ ]/[ ]
	buttons to select “1. Input/Output
ENTER	Assign,” and then press
	[ENTER].

The Input/Output Assign menu appears.

ENTER

4 Use the Up and Down [ ]/[ ]

buttons to select an input selec- tor, and use the Left and Right

ENTER

[]/[ ] buttons to select:

IN1: Select if the video component is connected to HDMI IN 1.

IN2: Select if the video component is connected to HDMI IN 2.

IN3: Select if the video component

ENTER

is connected to HDMI IN 3. IN4: Select if the video component

is connected to HDMI IN 4.

-- -:Select this to upconvert and output composite video, S-Video, and component video sources from the HDMI OUT.

5		Press the [SETUP] button.
	S	Setup closes.
	E
	T
	UP

Notes:

•Each HDMI IN cannot be assigned to more than one input selector.

•For composite video, S-Video, and component video upconversion for the HDMI OUT MAIN or HDMI OUT SUB, the HDMI Monitor setting must be set to Main or Sub (see page 45). See page 27 for more information on video signal flow and upconver- sion.

•When an HDMI IN is assigned to an input selector as explained here, the digital audio input for that input selector is automatically set to the same HDMI IN. See “Digital Input Setup” on page 49.

•This procedure can also be performed on the AV con- troller by using its [SETUP], [ENTER], and arrow

buttons.

47