Onkyo PR-SC885 First Time Setup—Continued, AV controller is connected, Notes, zontal

First Time Setup—Continued

1	Turn on the AV controller and the
	connected TV.
	On the TV, select the input to which the
	AV controller is connected.
2	Place the setup microphone at
	the 1st measurement position,
	SETUP MIC and connect it to the SETUP MIC
	jack.
			Auto Speaker Setup	AUDYSSEY
			Please place microphone at center
			of listening area at ear height.
			Push Enter : Next
	Notes:
	• Make sure the microphone is hori-
		zontal.
	• If there’s an obstacle between the
		microphone and any speaker, the
		automatic setup will not work cor-
		rectly. Set up the room as you would

4

ENTER

ENTER

The speaker detect results appear.

Auto Speaker Setup AUDYSSEY

-----SP Detect Result-----

FL	: Yes	FR : Yes
SL	: Yes	SR : Yes
SBL	: Yes	SBR : Yes
C	: No	SW : Yes

Next

Retry

Cancel

“Yes” means that the speaker was detected. “No” means that no speaker was detected.

If you agree with the results, use the Up and Down []/[ ] but- tons to select Next, and then press [ENTER].

The options are:

Next: Proceed to the next step. Retry: Return to step 2 and try again. Cancel: Cancel the automatic speaker

setup.

	when enjoying a DVD movie.
	• Positioning the microphone close to
	where your ears would normally be
	will provide the best results. You can
	set the height of the microphone by
	using a tripod or level table.
3	Press [ENTER].
	Auto Speaker Setup AUDYSSEY
	ENTER
	Do not unplug microphone.
	Please keep quiet.
	Now Measuring...
	A test tone is output by each speaker in
	turn, as Audyssey MultEQ XT deter-
	mines which speakers are connected.
	This takes a few minutes.
	Note:
	• If any extraneous noise is picked up
	by the microphone, the automatic
	setup may not work correctly, so
	keep quiet.

5	The following screen appears.
	Auto Speaker Setup	AUDYSSEY
	Please place microphone at
	2nd Position at ear height.
	Push Enter : Next
	Place the setup microphone at
	the next position (see page 52),
	ENTER
	and then press [ENTER].
	Audyssey MultEQ XT performs more
	measurements. This takes a few min-
	utes.
	Auto Speaker Setup	AUDYSSEY
	Do not unplug microphone.
	Please keep quiet.
	Now Measuring...
6	When prompted, place the setup
	microphone at the next position,
	and repeat step 5.

53