Cisco Systems SFS 7000D manual 2 Removing the Power Supply from the Switch, 3 Power Supply LEDs

Chapter 4 Installing Field Replaceable Units

Installing a Power Supply Module

Step 3 Remove the power supply module if one is in place by pulling on the black handle. (See Figure 4-2.)

Figure 4-2 Removing the Power Supply from the Switch

154011

Step 4 Insert the new power supply module into the open slot until it is fully seated. You might need to push the unit with your thumbs to ensure that it is seated completely in the bay.

Step 5 Secure fasteners with a number 1 Phillips or a slotted screwdriver.

Step 6 Check the LEDs to verify the status of the module. (See Figure 4-3for the location of the LEDs.) For more information, see the “Power Supply LEDs” section on page 5-3.

Figure 4-3 Power Supply LEDs

154012

!

Power Supply

LEDs

Cisco SFS 7000P and SFS 7000D InfiniBand Server Switches Hardware Installation Guide

OL-10853-01 4-3