BASIC OPERATION
Turning on the power
Press 
on the TV.
• The 
indicator on the TV changes from red to green.
Standby mode
ENGLISH
Press 
on the remote control when the TV is on.
•The TV enters standby mode and the image on the screen disappears.
•The 
indicator on the TV changes from green to red.
•You can turn the TV on by pressing
on the remote control from standby mode, or press CH ϳ/ϴ on the TV or P+/- on the remote control.
•Weak electric power is still consumed even when 
is turned off.
•To completely turn off the TV, press 
on the TV.
NOTE
Display status indicator
Off | Power off |
Red | The TV is in standby mode. |
Green | The TV is on. |
If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the power outlet.
Auto setup
When the TV powers on for the first time after purchase, the initial auto installation menu will appear. You can automatically set language, country and channels in successive operations.
1.Press STANDBY 
on the right side of the unit or press
(STANDBY) on the remote. The Language select menu will appear first.
2. | Press ϳ/ϴ or ϵ/϶ to select desired language. Then press ENTER. | L A N G U A G E |
| ||
3. | Press ϳ or ϴ to select desired country. Then press ENTER. |
|
|
| D a n s k |
| E n g l i s h | ||||
4. | Check the aerial then press ENTER. |
| F r a n ç a i s | N o r s k | |
| D e u t s c h | N e d e r l a n d s | |||
5. | Press ϳ or ϴ to select the colour system. |
| E s p a ñ o l | Ǐ Ǹ Ǹ dz Ǻ Ƕ Ƿ ȉ | |
6. | Press ENTER to start automatic tuning. |
| I t a l i a n o | T ü r k ç e | |
| ȥ ɜ ɚ ɚ ɓ ɑ ɒ | P o r t u g u ê s | |||
Your TV will now automatically tune in all available channels. |
| S v e n s k a | P o l s k i | ||
|
|
| S u o m i |
| |
NOTE |
|
|
|
| |
| : SELECT | : SELECT | |||
Please be patient - the Auto Tuning process can take several minutes to complete. | ENTER : SET | EXIT : END | |||
|
|
|
| ||
When the tuning screen disappears and then normal TV screen appears, the Auto |
|
|
|
| |
tuning process is complete. |
|
|
|
| |
NOTE
•The initial auto installation functions only once. If the initial auto installation is not completed, try AUTO TUNING 25 .
•To cancel the Auto Tuning, press EXIT during the process.
•If the received signal for some channels is too weak, the automatic tuning system may not pick them up - in this case you may need to use manual tuning 25 .
•If you want to reconfigure the country setting, for instance after moving to another country, conduct “AUTO TUNING” from the Menu again.
Selecting the video input source
Press 
to view a signal from another device connected to your TV, such as a VCR or DVD player.You can select each input source depending on which input jacks you used to connect your devices.
To select the video input source, press ϳ/ϴ or the corresponding number button. Then press ENTER within 6 seconds.
S O U R C E S E L E C T I O N
0 . T V
1 . A V 1
2 . A V 2
3 . A V 3
4 . A V 4
5 . C O M P O N E N T
6 . H D M I 1
7 . H D M I 2
8 . P C
[0 - 8 ]: SELECT ENTER : SET
19
Downloaded From
