Panasonic KX-TVS80, KX-TVS50 209, Parameter Value Range Description/Function Default

B3 SYSTEM ADMINISTRATION - SETTING COS (CLASS OF SERVICE) PARAMETERS

			Table 38
Parameter	Value Range			Description/Function
		(Default)
Prompt mode	1.	System	Specifies the language used for voice prompts.
	2.	User 1
	3.	User 2	Note: If User 1 or User 2 is specified as Prompt Mode but
		(User 1)	not recorded by the Message Manager, the VPS will
			automatically play the factory recorded system prompts in
			English. By default, both User 1 and User 2 prompts are not
			recorded.
Authorization	1.	Yes	When set to "Yes," the Message Manager is able to utilize
for Message	2.	No	the Message Waiting Notification feature. The sub-
Notification		(Yes)	parameters to be set include Beeper Callback No. Entry
			Mode, MWL Notification for Unreceived Message, and
			Device Notification for Unreceived Message. If set to "NO",
			sub-parameters cannot be assigned.
Beeper	1.	Caller	Permits the Message Manager to use the Callback Number
Callback		Select	Entry feature.
No. Entry	2.	Without
Mode	3.	Before	Caller	After recording a message, the caller is asked
	4.	After
			Select:	if the message is urgent. If urgent, the caller is
	5.	Disable
				asked to enter the callback number.
		(Disable)
			Without:	Without recording a message, the caller is
				asked to enter the callback number.
			Before:	Before recording a message, the system asks
				the caller to enter the callback number.
			After:	After recording a message, the system asks the
				caller to enter the callback number.
			Disable:	Disables the Callback Number Entry feature.
			Note: To utilize this feature, the callback number entry code
			must be included in the Subscriber's beeper number. When
			"Disable" is selected or if the caller does not enter a callback
			number, "System Callback No." (See Table 56) will be
			displayed on the beeper's display. If a caller's number is
			received through a telephone company's Caller ID service,
			the caller's number will be displayed instead of "System
			Callback No."
MWL	1.	Yes	The message waiting lamp is illuminated when this
Notification for	2.	No	parameter has been set to "Yes" and when unplayed
Unreceived		(Yes)	messages remain after the Message Manager has accessed
Message			the mailbox.

SYSTEM ADMINISTRATOR'S GUIDE 209